fortinet.fortios.fortios_vpn_ipsec_phase2_interface – Configure VPN autokey tunnel in Fortinet’s FortiOS and FortiGate.

From Get docs
Ansible/docs/2.11/collections/fortinet/fortios/fortios vpn ipsec phase2 interface module


fortinet.fortios.fortios_vpn_ipsec_phase2_interface – Configure VPN autokey tunnel in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 1.1.8).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ipsec_phase2_interface.


New in version 2.8: of fortinet.fortios


Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and phase2_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

state

string

added in 2.9 of fortinet.fortios

  • present
  • absent

Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.

vdom

string

Default:

"root"

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

vpn_ipsec_phase2_interface

dictionary

Configure VPN autokey tunnel.

add_route

string

  • phase1
  • enable
  • disable

Enable/disable automatic route addition.

auto_discovery_forwarder

string

  • phase1
  • enable
  • disable

Enable/disable forwarding short-cut messages.

auto_discovery_sender

string

  • phase1
  • enable
  • disable

Enable/disable sending short-cut messages.

auto_negotiate

string

  • enable
  • disable

Enable/disable IPsec SA auto-negotiation.

comments

string

Comment.

dhcp_ipsec

string

  • enable
  • disable

Enable/disable DHCP-IPsec.

dhgrp

string

  • 1
  • 2
  • 5
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 27
  • 28
  • 29
  • 30
  • 31

Phase2 DH group.

dst_addr_type

string

  • subnet
  • range
  • ip
  • name
  • subnet6
  • range6
  • ip6
  • name6

Remote proxy ID type.

dst_end_ip

string

Remote proxy ID IPv4 end.

dst_end_ip6

string

Remote proxy ID IPv6 end.

dst_name

string

Remote proxy ID name. Source firewall.address.name firewall.addrgrp.name.

dst_name6

string

Remote proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.

dst_port

integer

Quick mode destination port (1 - 65535 or 0 for all).

dst_start_ip

string

Remote proxy ID IPv4 start.

dst_start_ip6

string

Remote proxy ID IPv6 start.

dst_subnet

string

Remote proxy ID IPv4 subnet.

dst_subnet6

string

Remote proxy ID IPv6 subnet.

encapsulation

string

  • tunnel-mode
  • transport-mode

ESP encapsulation mode.

keepalive

string

  • enable
  • disable

Enable/disable keep alive.

keylife_type

string

  • seconds
  • kbs
  • both

Keylife type.

keylifekbs

integer

Phase2 key life in number of bytes of traffic (5120 - 4294967295).

keylifeseconds

integer

Phase2 key life in time in seconds (120 - 172800).

l2tp

string

  • enable
  • disable

Enable/disable L2TP over IPsec.

name

string / required

IPsec tunnel name.

pfs

string

  • enable
  • disable

Enable/disable PFS feature.

phase1name

string

Phase 1 determines the options required for phase 2. Source vpn.ipsec.phase1-interface.name.

proposal

list / elements=string

  • null-md5
  • null-sha1
  • null-sha256
  • null-sha384
  • null-sha512
  • des-null
  • des-md5
  • des-sha1
  • des-sha256
  • des-sha384
  • des-sha512
  • 3des-null
  • 3des-md5
  • 3des-sha1
  • 3des-sha256
  • 3des-sha384
  • 3des-sha512
  • aes128-null
  • aes128-md5
  • aes128-sha1
  • aes128-sha256
  • aes128-sha384
  • aes128-sha512
  • aes128gcm
  • aes192-null
  • aes192-md5
  • aes192-sha1
  • aes192-sha256
  • aes192-sha384
  • aes192-sha512
  • aes256-null
  • aes256-md5
  • aes256-sha1
  • aes256-sha256
  • aes256-sha384
  • aes256-sha512
  • aes256gcm
  • chacha20poly1305
  • aria128-null
  • aria128-md5
  • aria128-sha1
  • aria128-sha256
  • aria128-sha384
  • aria128-sha512
  • aria192-null
  • aria192-md5
  • aria192-sha1
  • aria192-sha256
  • aria192-sha384
  • aria192-sha512
  • aria256-null
  • aria256-md5
  • aria256-sha1
  • aria256-sha256
  • aria256-sha384
  • aria256-sha512
  • seed-null
  • seed-md5
  • seed-sha1
  • seed-sha256
  • seed-sha384
  • seed-sha512

Phase2 proposal.

protocol

integer

Quick mode protocol selector (1 - 255 or 0 for all).

replay

string

  • enable
  • disable

Enable/disable replay detection.

route_overlap

string

  • use-old
  • use-new
  • allow

Action for overlapping routes.

single_source

string

  • enable
  • disable

Enable/disable single source IP restriction.

src_addr_type

string

  • subnet
  • range
  • ip
  • name
  • subnet6
  • range6
  • ip6
  • name6

Local proxy ID type.

src_end_ip

string

Local proxy ID end.

src_end_ip6

string

Local proxy ID IPv6 end.

src_name

string

Local proxy ID name. Source firewall.address.name firewall.addrgrp.name.

src_name6

string

Local proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.

src_port

integer

Quick mode source port (1 - 65535 or 0 for all).

src_start_ip

string

Local proxy ID start.

src_start_ip6

string

Local proxy ID IPv6 start.

src_subnet

string

Local proxy ID subnet.

src_subnet6

string

Local proxy ID IPv6 subnet.

state

string

  • present
  • absent

Deprecated

Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.



Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks


Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure VPN autokey tunnel.
    fortios_vpn_ipsec_phase2_interface:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      vpn_ipsec_phase2_interface:
        add_route: "phase1"
        auto_discovery_forwarder: "phase1"
        auto_discovery_sender: "phase1"
        auto_negotiate: "enable"
        comments: "<your_own_value>"
        dhcp_ipsec: "enable"
        dhgrp: "1"
        dst_addr_type: "subnet"
        dst_end_ip: "<your_own_value>"
        dst_end_ip6: "<your_own_value>"
        dst_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        dst_name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        dst_port: "15"
        dst_start_ip: "<your_own_value>"
        dst_start_ip6: "<your_own_value>"
        dst_subnet: "<your_own_value>"
        dst_subnet6: "<your_own_value>"
        encapsulation: "tunnel-mode"
        keepalive: "enable"
        keylife_type: "seconds"
        keylifekbs: "23"
        keylifeseconds: "24"
        l2tp: "enable"
        name: "default_name_26"
        pfs: "enable"
        phase1name: "<your_own_value> (source vpn.ipsec.phase1-interface.name)"
        proposal: "null-md5"
        protocol: "30"
        replay: "enable"
        route_overlap: "use-old"
        single_source: "enable"
        src_addr_type: "subnet"
        src_end_ip: "<your_own_value>"
        src_end_ip6: "<your_own_value>"
        src_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        src_name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        src_port: "39"
        src_start_ip: "<your_own_value>"
        src_start_ip6: "<your_own_value>"
        src_subnet: "<your_own_value>"
        src_subnet6: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

build

string

always

Build number of the fortigate image


Sample:

1547

http_method

string

always

Last method used to provision the content into FortiGate


Sample:

PUT

http_status

string

always

Last result given by FortiGate on last operation applied


Sample:

200

mkey

string

success

Master key (id) used in the last call to FortiGate


Sample:

id

name

string

always

Name of the table used to fulfill the request


Sample:

urlfilter

path

string

always

Path of the table used to fulfill the request


Sample:

webfilter

revision

string

always

Internal revision number


Sample:

17.0.2.10658

serial

string

always

Serial number of the unit


Sample:

FGVMEVYYQT3AB5352

status

string

always

Indication of the operation's result


Sample:

success

vdom

string

always

Virtual domain used


Sample:

root

version

string

always

Version of the FortiGate


Sample:

v5.6.3




Authors

  • Link Zheng (@chillancezen)
  • Jie Xue (@JieX19)
  • Hongbin Lu (@fgtdev-hblu)
  • Frank Shen (@frankshen01)
  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/fortinet/fortios/fortios_vpn_ipsec_phase2_interface_module.html


Retrieved from "https://getdocs.org/index.php?title=Ansible/docs/2.11/collections/fortinet/fortios/fortios_vpn_ipsec_phase2_interface_module&oldid=64422"
Powered by MediaWiki