fortinet.fortios.fortios_web_proxy_explicit – Configure explicit Web proxy settings in Fortinet’s FortiOS and FortiGate.

From Get docs
Ansible/docs/2.11/collections/fortinet/fortios/fortios web proxy explicit module


fortinet.fortios.fortios_web_proxy_explicit – Configure explicit Web proxy settings in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 1.1.8).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_web_proxy_explicit.


New in version 2.8: of fortinet.fortios


Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify web_proxy feature and explicit category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

vdom

string

Default:

"root"

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

web_proxy_explicit

dictionary

Configure explicit Web proxy settings.

ftp_incoming_port

string

Accept incoming FTP-over-HTTP requests on one or more ports (0 - 65535).

ftp_over_http

string

  • enable
  • disable

Enable to proxy FTP-over-HTTP sessions sent from a web browser.

http_incoming_port

string

Accept incoming HTTP requests on one or more ports (0 - 65535).

https_incoming_port

string

Accept incoming HTTPS requests on one or more ports (0 - 65535).

https_replacement_message

string

  • enable
  • disable

Enable/disable sending the client a replacement message for HTTPS requests.

incoming_ip

string

Restrict the explicit HTTP proxy to only accept sessions from this IP address. An interface must have this IP address.

incoming_ip6

string

Restrict the explicit web proxy to only accept sessions from this IPv6 address. An interface must have this IPv6 address.

ipv6_status

string

  • enable
  • disable

Enable/disable allowing an IPv6 web proxy destination in policies and all IPv6 related entries in this command.

message_upon_server_error

string

  • enable
  • disable

Enable/disable displaying a replacement message when a server error is detected.

outgoing_ip

string

Outgoing HTTP requests will have this IP address as their source address. An interface must have this IP address.

outgoing_ip6

string

Outgoing HTTP requests will leave this IPv6. Multiple interfaces can be specified. Interfaces must have these IPv6 addresses.

pac_file_data

string

PAC file contents enclosed in quotes (maximum of 256K bytes).

pac_file_name

string

Pac file name.

pac_file_server_port

string

Port number that PAC traffic from client web browsers uses to connect to the explicit web proxy (0 - 65535).

pac_file_server_status

string

  • enable
  • disable

Enable/disable Proxy Auto-Configuration (PAC) for users of this explicit proxy profile.

pac_file_url

string

PAC file access URL.

pac_policy

list / elements=string

PAC policies.

comments

string

Optional comments.

dstaddr

list / elements=string

Destination address objects.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name.

pac_file_data

string

PAC file contents enclosed in quotes (maximum of 256K bytes).

pac_file_name

string

Pac file name.

policyid

integer / required

Policy ID.

srcaddr

list / elements=string

Source address objects.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name.

srcaddr6

list / elements=string

Source address6 objects.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name.

status

string

  • enable
  • disable

Enable/disable policy.

pref_dns_result

string

  • ipv4
  • ipv6

Prefer resolving addresses using the configured IPv4 or IPv6 DNS server .

realm

string

Authentication realm used to identify the explicit web proxy (maximum of 63 characters).

sec_default_action

string

  • accept
  • deny

Accept or deny explicit web proxy sessions when no web proxy firewall policy exists.

socks

string

  • enable
  • disable

Enable/disable the SOCKS proxy.

socks_incoming_port

string

Accept incoming SOCKS proxy requests on one or more ports (0 - 65535).

ssl_algorithm

string

  • high
  • medium
  • low

Relative strength of encryption algorithms accepted in HTTPS deep scan: high, medium, or low.

status

string

  • enable
  • disable

Enable/disable the explicit Web proxy for HTTP and HTTPS session.

strict_guest

string

  • enable
  • disable

Enable/disable strict guest user checking by the explicit web proxy.

trace_auth_no_rsp

string

  • enable
  • disable

Enable/disable logging timed-out authentication requests.

unknown_http_version

string

  • reject
  • best-effort

Either reject unknown HTTP traffic as malformed or handle unknown HTTP traffic as best as the proxy server can.



Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks


Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure explicit Web proxy settings.
    fortios_web_proxy_explicit:
      vdom:  "{{ vdom }}"
      web_proxy_explicit:
        ftp_incoming_port: "<your_own_value>"
        ftp_over_http: "enable"
        http_incoming_port: "<your_own_value>"
        https_incoming_port: "<your_own_value>"
        https_replacement_message: "enable"
        incoming_ip: "<your_own_value>"
        incoming_ip6: "<your_own_value>"
        ipv6_status: "enable"
        message_upon_server_error: "enable"
        outgoing_ip: "<your_own_value>"
        outgoing_ip6: "<your_own_value>"
        pac_file_data: "<your_own_value>"
        pac_file_name: "<your_own_value>"
        pac_file_server_port: "<your_own_value>"
        pac_file_server_status: "enable"
        pac_file_url: "<your_own_value>"
        pac_policy:
         -
            comments: "<your_own_value>"
            dstaddr:
             -
                name: "default_name_22 (source firewall.address.name firewall.addrgrp.name)"
            pac_file_data: "<your_own_value>"
            pac_file_name: "<your_own_value>"
            policyid: "25"
            srcaddr:
             -
                name: "default_name_27 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name)"
            srcaddr6:
             -
                name: "default_name_29 (source firewall.address6.name firewall.addrgrp6.name)"
            status: "enable"
        pref_dns_result: "ipv4"
        realm: "<your_own_value>"
        sec_default_action: "accept"
        socks: "enable"
        socks_incoming_port: "<your_own_value>"
        ssl_algorithm: "high"
        status: "enable"
        strict_guest: "enable"
        trace_auth_no_rsp: "enable"
        unknown_http_version: "reject"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

build

string

always

Build number of the fortigate image


Sample:

1547

http_method

string

always

Last method used to provision the content into FortiGate


Sample:

PUT

http_status

string

always

Last result given by FortiGate on last operation applied


Sample:

200

mkey

string

success

Master key (id) used in the last call to FortiGate


Sample:

id

name

string

always

Name of the table used to fulfill the request


Sample:

urlfilter

path

string

always

Path of the table used to fulfill the request


Sample:

webfilter

revision

string

always

Internal revision number


Sample:

17.0.2.10658

serial

string

always

Serial number of the unit


Sample:

FGVMEVYYQT3AB5352

status

string

always

Indication of the operation's result


Sample:

success

vdom

string

always

Virtual domain used


Sample:

root

version

string

always

Version of the FortiGate


Sample:

v5.6.3




Authors

  • Link Zheng (@chillancezen)
  • Jie Xue (@JieX19)
  • Hongbin Lu (@fgtdev-hblu)
  • Frank Shen (@frankshen01)
  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/fortinet/fortios/fortios_web_proxy_explicit_module.html


Retrieved from "https://getdocs.org/index.php?title=Ansible/docs/2.11/collections/fortinet/fortios/fortios_web_proxy_explicit_module&oldid=64446"
Powered by MediaWiki