mellanox.onyx.onyx_linkagg – Manage link aggregation groups on Mellanox ONYX network devices

Note

This plugin is part of the mellanox.onyx collection (version 1.0.0).

To install it use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_linkagg.

Synopsis
Parameters
Examples
Return Values

Synopsis

This module provides declarative management of link aggregation groups on Mellanox ONYX network devices.

Parameters

Parameter	Choices/Defaults	Comments
aggregate string		List of link aggregation definitions.
members string / required		List of members interfaces of the link aggregation group. The value can be single interface or list of interfaces.
mode string	on active passive Default: "yes"	Mode of the link aggregation group. A value of `on` will enable LACP. `active` configures the link to actively information about the state of the link, or it can be configured in `passive` mode ie. send link state information only when received them from another link.
name string / required		Name of the link aggregation group.
purge boolean	no ← yes	Purge link aggregation groups not defined in the aggregate parameter.
state string	present ← absent up down	State of the link aggregation group.

Examples

- name: Configure link aggregation group
  onyx_linkagg:
    name: Po1
    members:
      - Eth1/1
      - Eth1/2

- name: Remove configuration
  onyx_linkagg:
    name: Po1
    state: absent

- name: Create aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
        - { name: Po1, members: [Eth1/1] }
        - { name: Po2, members: [Eth1/2] }

- name: Remove aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
      - name: Po1
      - name: Po2
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always.	The list of configuration mode commands to send to the device Sample: ['interface port-channel 1', 'exit', 'interface ethernet 1/1 channel-group 1 mode on', 'interface ethernet 1/2 channel-group 1 mode on']

Authors

Samer Deeb (@samerd)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/mellanox/onyx/onyx_linkagg_module.html