junipernetworks.junos.junos_vlans – VLANs resource module

Note

This plugin is part of the junipernetworks.junos collection (version 1.3.0).

To install it use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_vlans.

New in version 1.0.0: of junipernetworks.junos

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module creates and manages VLAN configurations on Junos OS.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)

Parameters

Parameter		Choices/Defaults	Comments
config list / elements=dictionary			A dictionary of Vlan options
	description string		Text description of VLANs
	name string / required		Name of VLAN.
	vlan_id integer		IEEE 802.1q VLAN identifier for VLAN (1..4094).
running_config string			This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show vlans. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state string		merged ← replaced overridden deleted gathered parsed rendered	The state of the configuration after module completion.

Notes

Note

This module requires the netconf system service be enabled on the remote device being managed
Tested against Junos OS 18.4R1
This module works with connection netconf. See the Junos OS Platform Options.

Examples

# Using merged
#############

# Before State
# ------------
#
# admin# show vlans
# vlan-2 {
#     vlan-id 2;
# }
# vlan-3 {
#     vlan-id 3;
# }

- name: Merge JUNOS vlan
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan-1
      vlan-id: 1
  state: merged
- name: Replace JUNOS vlan
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan-1
      vlan-id: 10
    - name: vlan-3
      vlan-id: 30
  state: replaced
- name: Override JUNOS vlan
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan-4
      vlan-id: 100
    - name: vlan-2
      vlan-id: 200
  state: overridden
- name: Delete JUNOS vlan
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan-1
  state: deleted

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['xml 1', 'xml 2', 'xml 3']

Authors

Daniel Mellado (@dmellado)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/junipernetworks/junos/junos_vlans_module.html