vmware_dvswitch – Create or remove a Distributed Switch

vmware_dvswitch – Create or remove a Distributed Switch

• Synopsis
• Requirements
• Parameters
• Notes
• Examples
• Return Values
• Status

Synopsis

• This module can be used to create, remove a Distributed Switch.

Requirements

The below requirements are needed on the host that executes this module.

• python >= 2.6
• PyVmomi

Parameters

Parameter	Choices/Defaults	Comments
contact dictionary added in 2.8		Dictionary which configures administrator contact name and description for the Distributed Switch. Valid attributes are: - name (str): Administrator name. - description (str): Description or other details.
datacenter_name string		The name of the datacenter that will contain the Distributed Switch. This parameter is optional, if folder is provided. Mutually exclusive with folder parameter. aliases: datacenter
description string added in 2.8		Description of the Distributed Switch.
discovery_operation string	both advertise listen ←	Select the discovery operation. Required parameter for state both present and absent, before Ansible 2.6 version. Required only if state is set to present, for Ansible 2.6 and onwards.
discovery_proto string	cdp ← lldp disabled	Link discovery protocol between Cisco and Link Layer discovery. Required parameter for state both present and absent, before Ansible 2.6 version. Required only if state is set to present, for Ansible 2.6 and onwards. cdp: Use Cisco Discovery Protocol (CDP). lldp: Use Link Layer Discovery Protocol (LLDP). disabled: Do not use a discovery protocol. aliases: discovery_protocol
folder string added in 2.9		Destination folder, absolute path to place dvswitch in. The folder should include the datacenter. This parameter is case sensitive. This parameter is optional, if datacenter is provided. Examples: folder: /datacenter1/network folder: datacenter1/network folder: /datacenter1/network/folder1 folder: datacenter1/network/folder1 folder: /folder1/datacenter1/network folder: folder1/datacenter1/network folder: /folder1/datacenter1/network/folder2
health_check dictionary added in 2.8	Default: {"teaming_failover": false, "teaming_failover_interval": 0, "vlan_mtu": false, "vlan_mtu_interval": 0}	Dictionary which configures Health Check for the Distributed Switch. Valid attributes are: - vlan_mtu (bool): VLAN and MTU health check. (default: False) - teaming_failover (bool): Teaming and failover health check. (default: False) - vlan_mtu_interval (int): VLAN and MTU health check interval (minutes). (default: 0) - The default for vlan_mtu_interval is 1 in the vSphere Client if the VLAN and MTU health check is enabled. - teaming_failover_interval (int): Teaming and failover health check interval (minutes). (default: 0) - The default for teaming_failover_interval is 1 in the vSphere Client if the Teaming and failover health check is enabled.
hostname string		The hostname or IP address of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_HOST will be used instead. Environment variable support added in Ansible 2.6.
mtu integer	Default: 1500	The switch maximum transmission unit. Required parameter for state both present and absent, before Ansible 2.6 version. Required only if state is set to present, for Ansible 2.6 and onwards. Accepts value between 1280 to 9000 (both inclusive).
multicast_filtering_mode string added in 2.8	basic ← snooping	The multicast filtering mode. basic mode: multicast traffic for virtual machines is forwarded according to the destination MAC address of the multicast group. snooping mode: the Distributed Switch provides IGMP and MLD snooping according to RFC 4541.
password string		The password of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_PASSWORD will be used instead. Environment variable support added in Ansible 2.6. aliases: pass, pwd
port integer added in 2.5	Default: 443	The port number of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_PORT will be used instead. Environment variable support added in Ansible 2.6.
proxy_host string added in 2.9		Address of a proxy that will receive all HTTPS requests and relay them. The format is a hostname or a IP. If the value is not specified in the task, the value of environment variable VMWARE_PROXY_HOST will be used instead. This feature depends on a version of pyvmomi greater than v6.7.1.2018.12
proxy_port integer added in 2.9		Port of the HTTP proxy that will receive all HTTPS requests and relay them. If the value is not specified in the task, the value of environment variable VMWARE_PROXY_PORT will be used instead.
state string	present ← absent	If set to present and the Distributed Switch doesn't exists then the Distributed Switch will be created. If set to absent and the Distributed Switch exists then the Distributed Switch will be deleted.
switch_name string / required		The name of the distribute vSwitch to create or remove. aliases: switch, dvswitch
switch_version string added in 2.5	5.0.0 5.1.0 5.5.0 6.0.0 6.5.0 6.6.0	The version of the Distributed Switch to create. Can be 6.0.0, 5.5.0, 5.1.0, 5.0.0 with a vCenter running vSphere 6.0 and 6.5. Can be 6.6.0, 6.5.0, 6.0.0 with a vCenter running vSphere 6.7. The version must match the version of the ESXi hosts you want to connect. The version of the vCenter server is used if not specified. Required only if state is set to present. aliases: version
uplink_prefix string added in 2.8	Default: "Uplink "	The prefix used for the naming of the uplinks. Only valid if the Distributed Switch will be created. Not used if the Distributed Switch is already present. Uplinks are created as Uplink 1, Uplink 2, etc. pp. by default.
uplink_quantity integer		Quantity of uplink per ESXi host added to the Distributed Switch. The uplink quantity can be increased or decreased, but a decrease will only be successfull if the uplink isn't used by a portgroup. Required parameter for state both present and absent, before Ansible 2.6 version. Required only if state is set to present, for Ansible 2.6 and onwards.
username string		The username of the vSphere vCenter or ESXi server. If the value is not specified in the task, the value of environment variable VMWARE_USER will be used instead. Environment variable support added in Ansible 2.6. aliases: admin, user
validate_certs boolean	no yes ←	Allows connection when SSL certificates are not valid. Set to false when certificates are not trusted. If the value is not specified in the task, the value of environment variable VMWARE_VALIDATE_CERTS will be used instead. Environment variable support added in Ansible 2.6. If set to yes, please make sure Python >= 2.7.9 is installed on the given machine.

Notes

Note

• Tested on vSphere 6.5 and 6.7

Examples

- name: Create dvSwitch
  vmware_dvswitch:
    hostname: '{{ vcenter_hostname }}'
    username: '{{ vcenter_username }}'
    password: '{{ vcenter_password }}'
    datacenter: '{{ datacenter }}'
    switch: dvSwitch
    version: 6.0.0
    mtu: 9000
    uplink_quantity: 2
    discovery_protocol: lldp
    discovery_operation: both
    state: present
  delegate_to: localhost

- name: Create dvSwitch with all options
  vmware_dvswitch:
    hostname: '{{ vcenter_hostname }}'
    username: '{{ vcenter_username }}'
    password: '{{ vcenter_password }}'
    datacenter: '{{ datacenter }}'
    switch: dvSwitch
    version: 6.5.0
    mtu: 9000
    uplink_quantity: 2
    uplink_prefix: 'Uplink_'
    discovery_protocol: cdp
    discovery_operation: both
    multicast_filtering_mode: snooping
    health_check:
      vlan_mtu: true
      vlan_mtu_interval: 1
      teaming_failover: true
      teaming_failover_interval: 1
    state: present
  delegate_to: localhost

- name: Delete dvSwitch
  vmware_dvswitch:
    hostname: '{{ vcenter_hostname }}'
    username: '{{ vcenter_username }}'
    password: '{{ vcenter_password }}'
    datacenter: '{{ datacenter }}'
    switch: dvSwitch
    state: absent
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
result string	always	information about performed operation Sample: {'changed': False, 'contact': None, 'contact_details': None, 'description': None, 'discovery_operation': 'both', 'discovery_protocol': 'cdp', 'dvswitch': 'test', 'health_check_teaming': False, 'health_check_teaming_interval': 0, 'health_check_vlan': False, 'health_check_vlan_interval': 0, 'mtu': 9000, 'multicast_filtering_mode': 'basic', 'result': 'DVS already configured properly', 'uplink_quantity': 2, 'uplinks': ['Uplink_1', 'Uplink_2'], 'version': '6.6.0'}

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]
• This module is maintained by the Ansible Community. [community]

Authors

• Joseph Callen (@jcpowermac)
• Abhijeet Kasurde (@Akasurde)
• Christian Kotte (@ckotte)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vmware_dvswitch_module.html