ce_vxlan_arp – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices
ce_vxlan_arp – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices
New in version 2.4.
Synopsis
- Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
arp_collect_host - |
|
Enables EVN BGP or BGP EVPN to collect host information. |
arp_suppress - |
|
Enables ARP broadcast suppression in a BD. |
bridge_domain_id - |
Specifies a BD(bridge domain) ID. The value is an integer ranging from 1 to 16777215. | |
evn_bgp - |
|
Enables EVN BGP. |
evn_peer_ip - |
Specifies the IP address of an EVN BGP peer. The value is in dotted decimal notation. | |
evn_reflect_client - |
|
Configures the local device as the route reflector (RR) and its peer as the client. |
evn_server - |
|
Configures the local device as the router reflector (RR) on the EVN network. |
evn_source_ip - |
Specifies the source address of an EVN BGP peer. The value is in dotted decimal notation. | |
host_collect_protocol - |
|
Enables EVN BGP or BGP EVPN to advertise host information. |
state - |
|
Determines whether the config should be present or not on the device. |
vbdif_name - |
Full name of VBDIF interface, i.e. Vbdif100. |
Notes
Note
- Recommended connection is
network_cli
. - This module also works with
local
connections for legacy playbooks.
Examples
- name: vxlan arp module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configure EVN BGP on Layer 2 and Layer 3 VXLAN gateways to establish EVN BGP peer relationships.
ce_vxlan_arp:
evn_bgp: enable
evn_source_ip: 6.6.6.6
evn_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Configure a Layer 3 VXLAN gateway as a BGP RR.
ce_vxlan_arp:
evn_bgp: enable
evn_server: enable
provider: "{{ cli }}"
- name: Enable EVN BGP on a Layer 3 VXLAN gateway to collect host information.
ce_vxlan_arp:
vbdif_name: Vbdif100
arp_collect_host: enable
provider: "{{ cli }}"
- name: Enable Layer 2 and Layer 3 VXLAN gateways to use EVN BGP to advertise host information.
ce_vxlan_arp:
host_collect_protocol: bgp
provider: "{{ cli }}"
- name: Enable ARP broadcast suppression on a Layer 2 VXLAN gateway.
ce_vxlan_arp:
bridge_domain_id: 100
arp_suppress: enable
provider: "{{ cli }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
check to see if a change was made on the device
Sample: True |
end_state dictionary |
verbose mode |
k/v pairs of configuration after module execution
Sample: {'evn_bgp': 'enable', 'evn_source_ip': '6.6.6.6', 'evn_peer_ip': ['7.7.7.7']} |
existing dictionary |
verbose mode |
k/v pairs of existing configuration
Sample: {'evn_bgp': 'disable', 'evn_source_ip': None, 'evn_peer_ip': []} |
proposed dictionary |
verbose mode |
k/v pairs of parameters passed into module
Sample: {'evn_bgp': 'enable', 'evn_source_ip': '6.6.6.6', 'evn_peer_ip': '7.7.7.7', 'state': 'present'} |
updates list |
always |
commands sent to the device
Sample: ['evn bgp', 'source-address 6.6.6.6', 'peer 7.7.7.7'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- QijunPan (@QijunPan)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ce_vxlan_arp_module.html