fortios_system_pppoe_interface – Configure the PPPoE interfaces in Fortinet’s FortiOS and FortiGate

New in version 2.9.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and pppoe_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

fortiosapi>=0.9.8

Parameters

Parameter		Choices/Defaults	Comments
host string			FortiOS or FortiGate IP address.
https boolean		no yes ←	Indicates if the requests towards FortiGate must use HTTPS protocol.
password string		Default: ""	FortiOS or FortiGate password.
ssl_verify boolean		no yes ←	Ensures FortiGate certificate must be verified by a proper CA.
state string / required		present absent	Indicates whether to create or remove the object.
system_pppoe_interface dictionary		Default: null	Configure the PPPoE interfaces.
	ac_name string		PPPoE AC name.
	auth_type string	auto pap chap mschapv1 mschapv2	PPP authentication type to use.
	device string		Name for the physical interface. Source system.interface.name.
	dial_on_demand string	enable disable	Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface.
	disc_retry_timeout integer		PPPoE discovery init timeout value in (0-4294967295 sec).
	idle_timeout integer		PPPoE auto disconnect after idle timeout (0-4294967295 sec).
	ipunnumbered string		PPPoE unnumbered IP.
	ipv6 string	enable disable	Enable/disable IPv6 Control Protocol (IPv6CP).
	lcp_echo_interval integer		PPPoE LCP echo interval in (0-4294967295 sec).
	lcp_max_echo_fails integer		Maximum missed LCP echo messages before disconnect (0-4294967295).
	name string / required		Name of the PPPoE interface.
	padt_retry_timeout integer		PPPoE terminate timeout value in (0-4294967295 sec).
	password string		Enter the password.
	pppoe_unnumbered_negotiate string	enable disable	Enable/disable PPPoE unnumbered negotiation.
	service_name string		PPPoE service name.
	username string		User name.
username string			FortiOS or FortiGate username.
vdom string		Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Requires fortiosapi library developed by Fortinet
Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure the PPPoE interfaces.
    fortios_system_pppoe_interface:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      system_pppoe_interface:
        ac_name: "<your_own_value>"
        auth_type: "auto"
        device: "<your_own_value> (source system.interface.name)"
        dial_on_demand: "enable"
        disc_retry_timeout: "7"
        idle_timeout: "8"
        ipunnumbered: "<your_own_value>"
        ipv6: "enable"
        lcp_echo_interval: "11"
        lcp_max_echo_fails: "12"
        name: "default_name_13"
        padt_retry_timeout: "14"
        password: "<your_own_value>"
        pppoe_unnumbered_negotiate: "enable"
        service_name: "<your_own_value>"
        username: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/fortios_system_pppoe_interface_module.html