netconf_get – Fetch configuration/state data from NETCONF enabled network devices

From Get docs
Ansible/docs/2.9/modules/netconf get module


netconf_get – Fetch configuration/state data from NETCONF enabled network devices

New in version 2.6.


Synopsis

  • NETCONF is a network management protocol developed and standardized by the IETF. It is documented in RFC 6241.
  • This module allows the user to fetch configuration and state data from NETCONF enabled network devices.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.5.2)
  • jxmlease

Parameters

Parameter Choices/Defaults Comments

display

-

  • json
  • pretty
  • xml

Encoding scheme to use when serializing output from the device. The option json will serialize the output as JSON data. If the option value is json it requires jxmlease to be installed on control node. The option pretty is similar to received XML response but is using human readable format (spaces, new lines). The option value xml is similar to received XML response but removes all XML namespaces.

filter

-

This argument specifies the XML string which acts as a filter to restrict the portions of the data to be are retrieved from the remote device. If this option is not specified entire configuration or state data is returned in result depending on the value of source option. The filter value can be either XML string or XPath, if the filter is in XPath format the NETCONF server running on remote host should support xpath capability else it will result in an error.

lock

-

  • never

  • always
  • if-supported

Instructs the module to explicitly lock the datastore specified as source. If no source is defined, the running datastore will be locked. By setting the option value always is will explicitly lock the datastore mentioned in source option. By setting the option value never it will not lock the source datastore. The value if-supported allows better interworking with NETCONF servers, which do not support the (un)lock operation for all supported datastores.

source

-

  • running
  • candidate
  • startup

This argument specifies the datastore from which configuration data should be fetched. Valid values are running, candidate and startup. If the source value is not set both configuration and state information are returned in response from running datastore.



Notes

Note

  • This module requires the NETCONF system service be enabled on the remote device being managed.
  • This module supports the use of connection=netconf
  • This module is supported on ansible_network_os network platforms. See the Network Platform Options for details.


Examples

- name: Get running configuration and state data
  netconf_get:

- name: Get configuration and state data from startup datastore
  netconf_get:
    source: startup

- name: Get system configuration data from running datastore state (junos)
  netconf_get:
    source: running
    filter: <configuration><system></system></configuration>

- name: Get configuration and state data in JSON format
  netconf_get:
    display: json

- name: get schema list using subtree w/ namespaces
  netconf_get:
    display: json
    filter: <netconf-state xmlns="urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring"><schemas><schema/></schemas></netconf-state>
    lock: never

- name: get schema list using xpath
  netconf_get:
    display: xml
    filter: /netconf-state/schemas/schema

- name: get interface configuration with filter (iosxr)
  netconf_get:
    display: pretty
    filter: <interface-configurations xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-ifmgr-cfg"></interface-configurations>
    lock: if-supported

- name: Get system configuration data from running datastore state (junos)
  netconf_get:
    source: running
    filter: <configuration><system></system></configuration>
    lock: if-supported

- name: Get complete configuration data from running datastore (SROS)
  netconf_get:
    source: running
    filter: <configure xmlns="urn:nokia.com:sros:ns:yang:sr:conf"/>

- name: Get complete state data (SROS)
  netconf_get:
    filter: <state xmlns="urn:nokia.com:sros:ns:yang:sr:state"/>

Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Ganesh Nalawade (@ganeshrn)
  • Sven Wisotzky (@wisotzky)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/netconf_get_module.html