bigip_pool – Manages F5 BIG-IP LTM pools
bigip_pool – Manages F5 BIG-IP LTM pools
Synopsis
- Manages F5 BIG-IP LTM pools via iControl REST API.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
aggregate list added in 2.8 |
List of pool definitions to be created, modified or removed. When using The module will The module also will not indicate what changes were made prior to failure, therefore it is strongly advised to run the module in check mode to make basic validation, prior to module execution.
| ||
description string |
Specifies descriptive text that identifies the pool. | ||
lb_method string |
|
Load balancing method. When creating a new pool, if this value is not specified, the default of | |
metadata raw added in 2.5 |
Arbitrary key/value pairs that you can attach to a pool. This is useful in situations where you might want to annotate a pool to me managed by Ansible. Key names will be stored as strings; this includes names that are numbers. Values for all of the keys will be stored as strings; this includes values that are numbers. Data will be persisted, not ephemeral. | ||
monitor_type string |
|
Monitor rule type when When creating a new pool, if this value is not specified, the default of 'and_list' will be used. When When When Both | |
monitors list |
Monitor template name list. If the partition is not provided as part of the monitor name, then the | ||
name string / required |
Pool name
| ||
partition string added in 2.5 |
Default: "Common" |
Device partition to manage resources on. | |
priority_group_activation integer added in 2.6 |
Specifies whether the system load balances traffic according to the priority number assigned to the pool member. When creating a new pool, if this parameter is not specified, the default of To disable this setting, provide the value Once you enable this setting, you can specify pool member priority when you create a new pool or on a pool member's properties screen. The system treats same-priority pool members as a group. To enable priority group activation, provide a number from When a sufficient number of members become available in the higher priority group, the system again directs traffic to the higher priority group.
| ||
provider dictionary added in 2.5 |
A dict object containing connection details. | ||
auth_provider string |
Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices. | ||
password string / required |
The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable
| ||
server string / required |
The BIG-IP host. You may omit this option by setting the environment variable | ||
server_port integer |
Default: 443 |
The BIG-IP server port. You may omit this option by setting the environment variable | |
ssh_keyfile path |
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable | ||
timeout integer |
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | ||
transport string |
|
Configures the transport connection to use when connecting to the remote device. | |
user string / required |
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable | ||
validate_certs boolean |
|
If You may omit this option by setting the environment variable | |
quorum integer |
Monitor quorum value when Quorum must be a value of 1 or greater when | ||
replace_all_with boolean added in 2.8 |
|
Remove pools not defined in the This operation is all or none, meaning that it will stop if there are some pools that cannot be removed.
| |
reselect_tries integer |
Sets the number of times the system tries to contact a pool member after a passive failure. | ||
service_down_action string |
|
Sets the action to take when node goes down in pool. | |
slow_ramp_time integer |
Sets the ramp-up time (in seconds) to gradually ramp up the load on newly added or freshly detected up pool members. | ||
state string added in 2.5 |
|
When When |
Notes
Note
- To add members to a pool, use the
bigip_pool_member
module. Previously, thebigip_pool
module allowed the management of members, but this has been removed in version 2.5 of Ansible. - For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
- Requires BIG-IP software version >= 12.
- The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.
Examples
- name: Create pool
bigip_pool:
state: present
name: my-pool
partition: Common
lb_method: least-connections-member
slow_ramp_time: 120
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Modify load balancer method
bigip_pool:
state: present
name: my-pool
partition: Common
lb_method: round-robin
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Set a single monitor (with enforcement)
bigip_pool:
state: present
name: my-pool
partition: Common
monitor_type: single
monitors:
- http
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Set a single monitor (without enforcement)
bigip_pool:
state: present
name: my-pool
partition: Common
monitors:
- http
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Set multiple monitors (all must succeed)
bigip_pool:
state: present
name: my-pool
partition: Common
monitor_type: and_list
monitors:
- http
- tcp
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Set multiple monitors (at least 1 must succeed)
bigip_pool:
state: present
name: my-pool
partition: Common
monitor_type: m_of_n
quorum: 1
monitors:
- http
- tcp
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Delete pool
bigip_pool:
state: absent
name: my-pool
partition: Common
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Add metadata to pool
bigip_pool:
state: present
name: my-pool
partition: Common
metadata:
ansible: 2.4
updated_at: 2017-12-20T17:50:46Z
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Add pools Aggregate
bigip_pool:
aggregate:
- name: my-pool
partition: Common
lb_method: least-connections-member
slow_ramp_time: 120
- name: my-pool2
partition: Common
lb_method: least-sessions
slow_ramp_time: 120
- name: my-pool3
partition: Common
lb_method: round-robin
slow_ramp_time: 120
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Add pools Aggregate, purge others
bigip_pool:
aggregate:
- name: my-pool
partition: Common
lb_method: least-connections-member
slow_ramp_time: 120
- name: my-pool2
partition: Common
lb_method: least-sessions
slow_ramp_time: 120
- name: my-pool3
partition: Common
lb_method: round-robin
slow_ramp_time: 120
replace_all_with: yes
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
description string |
changed |
Description set on the pool.
Sample: Pool of web servers |
lb_method string |
changed |
The LB method set for the pool.
Sample: round-robin |
metadata dictionary |
changed |
The new value of the pool.
Sample: {'key1': 'foo', 'key2': 'bar'} |
monitor_type string |
changed |
The contact that was set on the datacenter.
Sample: |
monitors list |
changed |
Monitors set on the pool.
Sample: ['/Common/http', '/Common/gateway_icmp'] |
priority_group_activation integer |
changed |
The new minimum number of members to activate the priority group.
Sample: 10 |
quorum integer |
changed |
The quorum that was set on the pool.
Sample: 2 |
replace_all_with boolean |
changed |
Purges all non-aggregate pools from device
Sample: True |
reselect_tries integer |
changed |
The new value that is set for the number of tries to contact member.
Sample: 10 |
service_down_action string |
changed |
Service down action that is set on the pool.
Sample: reset |
slow_ramp_time integer |
changed |
The new value that is set for the slow ramp-up time.
Sample: 500 |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Tim Rupp (@caphrim007)
- Wojciech Wypior (@wojtek0806)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/bigip_pool_module.html