ios_lag_interfaces – Manage Link Aggregation on Cisco IOS devices
ios_lag_interfaces – Manage Link Aggregation on Cisco IOS devices
New in version 2.9.
Synopsis
- This module manages properties of Link Aggregation Group on Cisco IOS devices.
Parameters
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
config list / elements=dictionary |
A list of link aggregation group configurations. | |||
members list |
Interface options for the link aggregation group. | |||
link integer |
Assign a link identifier used for load-balancing. Refer to vendor documentation for valid values. NOTE, parameter only supported on Cisco IOS XE platform. | |||
member string |
Interface member of the link aggregation group. | |||
mode string |
|
Etherchannel Mode of the interface for link aggregation. | ||
name string / required |
ID of Ethernet Channel of interfaces. Refer to vendor documentation for valid port values. | |||
state string |
|
The state of the configuration after module completion |
Notes
Note
- Tested against Cisco IOSv Version 15.2 on VIRL
- This module works with connection
network_cli
. See IOS Platform Options.
Examples
---
# Using merged
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# interface GigabitEthernet0/3
# shutdown
# interface GigabitEthernet0/4
# shutdown
- name: Merge provided configuration with device configuration
ios_lag_interfaces:
config:
- name: 10
members:
- member: GigabitEthernet0/1
mode: auto
- member: GigabitEthernet0/2
mode: auto
- name: 20
members:
- member: GigabitEthernet0/3
mode: on
- name: 30
members:
- member: GigabitEthernet0/4
mode: active
state: merged
# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/2
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 20 mode on
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
# Using overridden
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/2
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 20 mode on
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
- name: Override device configuration of all interfaces with provided configuration
ios_lag_interfaces:
config:
- name: 20
members:
- member: GigabitEthernet0/2
mode: auto
- member: GigabitEthernet0/3
mode: auto
state: overridden
# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# channel-group 20 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 20 mode auto
# interface GigabitEthernet0/4
# shutdown
# Using replaced
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/2
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 20 mode on
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
- name: Replaces device configuration of listed interfaces with provided configuration
ios_lag_interfaces:
config:
- name: 40
members:
- member: GigabitEthernet0/3
mode: auto
state: replaced
# After state:
# ------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface Port-channel40
# interface GigabitEthernet0/1
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/2
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 40 mode on
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
# Using Deleted
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/2
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 20 mode on
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
- name: "Delete LAG attributes of given interfaces (Note: This won't delete the interface itself)"
ios_lag_interfaces:
config:
- name: 10
- name: 20
state: deleted
# After state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# interface GigabitEthernet0/3
# shutdown
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
# Using Deleted without any config passed
#"(NOTE: This will delete all of configured LLDP module attributes)"
#
# Before state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/2
# shutdown
# channel-group 10 mode auto
# interface GigabitEthernet0/3
# shutdown
# channel-group 20 mode on
# interface GigabitEthernet0/4
# shutdown
# channel-group 30 mode active
- name: "Delete all configured LAG attributes for interfaces (Note: This won't delete the interface itself)"
ios_lag_interfaces:
state: deleted
# After state:
# -------------
#
# vios#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# interface GigabitEthernet0/3
# shutdown
# interface GigabitEthernet0/4
# shutdown
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after list |
when changed |
The configuration as structured data after module completion.
Sample: The configuration returned will always be in the same format of the parameters above. |
before list |
always |
The configuration as structured data prior to module invocation.
Sample: The configuration returned will always be in the same format of the parameters above. |
commands list |
always |
The set of commands pushed to the remote device
Sample: ['interface GigabitEthernet0/1', 'channel-group 1 mode active'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Sumit Jaiswal (@justjais)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ios_lag_interfaces_module.html