eos_interfaces – Manages interface attributes of Arista EOS interfaces

New in version 2.9.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis

This module manages the interface attributes of Arista EOS interfaces.

Parameters

Parameter		Choices/Defaults	Comments
config list			The provided configuration
	description string		Interface description
	duplex string		Interface link status. Applicable for Ethernet interfaces only. Values other than `auto` must also set speed. Ignored when speed is set above `1000`.
	enabled boolean	no yes ←	Administrative state of the interface. Set the value to `true` to administratively enable the interface or `false` to disable it.
	mtu integer		MTU for a specific interface. Must be an even number between 576 and 9216. Applicable for Ethernet interfaces only.
	name string / required		Full name of the interface, e.g. GigabitEthernet1.
	speed string		Interface link speed. Applicable for Ethernet interfaces only.
state string		merged ← replaced overridden deleted	The state of the configuration after module completion.

Notes

Note

Tested against Arista EOS 4.20.10M
This module works with connection network_cli. See the EOS Platform Options.

Examples

---

# Using merged

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Merge provided configuration with device configuration
  eos_interfaces:
    config:
      - name: Ethernet1
        enabled: True
      - name: Ethernet2
        description: 'Configured by Ansible'
        enable: False
    state: merged

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

# Using replaced

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Replaces device configuration of listed interfaces with provided configuration
  eos_interfaces:
    config:
      - name: Ethernet1
        enabled: True
      - name: Ethernet2
        description: 'Configured by Ansible'
        enabled: False
    state: replaced

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

# Using overridden

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Overrides all device configuration with provided configuration
  eos_interfaces:
    config:
      - name: Ethernet1
        enabled: True
      - name: Ethernet2
        description: 'Configured by Ansible'
        enabled: False
    state: overridden

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description "Configured by Ansible"
#    shutdown
# !
# interface Management1
#    ip address dhcp
# !

# Using deleted

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    description "Interface 1"
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

- name: Delete or return interface parameters to default settings
  eos_interfaces:
    config:
      - name: Ethernet1
    state: deleted

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# !
# interface Management1
#    description "Management interface"
#    ip address dhcp
# !

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before dictionary	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['interface Ethernet2', 'shutdown', 'speed 10full']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

Nathaniel Case (@qalthos)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/eos_interfaces_module.html