fortios_wireless_controller_global – Configure wireless controller global settings in Fortinet’s FortiOS and FortiGate

From Get docs
Ansible/docs/2.9/modules/fortios wireless controller global module


fortios_wireless_controller_global – Configure wireless controller global settings in Fortinet’s FortiOS and FortiGate

New in version 2.8.


Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and global category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments

host

string

FortiOS or FortiGate IP address.

https

boolean

  • no
  • yes

Indicates if the requests towards FortiGate must use HTTPS protocol.

password

string

Default:

""

FortiOS or FortiGate password.

ssl_verify

boolean

added in 2.9

  • no
  • yes

Ensures FortiGate certificate must be verified by a proper CA.

username

string

FortiOS or FortiGate username.

vdom

string

Default:

"root"

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

wireless_controller_global

dictionary

Default:

null

Configure wireless controller global settings.

ap_log_server

string

  • enable
  • disable

Enable/disable configuring APs or FortiAPs to send log messages to a syslog server .

ap_log_server_ip

string

IP address that APs or FortiAPs send log messages to.

ap_log_server_port

integer

Port that APs or FortiAPs send log messages to.

control_message_offload

string

  • ebp-frame
  • aeroscout-tag
  • ap-list
  • sta-list
  • sta-cap-list
  • stats
  • aeroscout-mu

Configure CAPWAP control message data channel offload.

data_ethernet_II

string

  • enable
  • disable

Configure the wireless controller to use Ethernet II or 802.3 frames with 802.3 data tunnel mode .

discovery_mc_addr

string

Multicast IP address for AP discovery .

fiapp_eth_type

integer

Ethernet type for Fortinet Inter-Access Point Protocol (IAPP), or IEEE 802.11f, packets (0 - 65535).

image_download

string

  • enable
  • disable

Enable/disable WTP image download at join time.

ipsec_base_ip

string

Base IP address for IPsec VPN tunnels between the access points and the wireless controller .

link_aggregation

string

  • enable
  • disable

Enable/disable calculating the CAPWAP transmit hash to load balance sessions to link aggregation nodes .

location

string

Description of the location of the wireless controller.

max_clients

integer

Maximum number of clients that can connect simultaneously .

max_retransmit

integer

Maximum number of tunnel packet retransmissions (0 - 64).

mesh_eth_type

integer

Mesh Ethernet identifier included in backhaul packets (0 - 65535).

name

string

Name of the wireless controller.

rogue_scan_mac_adjacency

integer

Maximum numerical difference between an AP's Ethernet and wireless MAC values to match for rogue detection (0 - 31).

wtp_share

string

  • enable
  • disable

Enable/disable sharing of WTPs between VDOMs.



Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook


Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure wireless controller global settings.
    fortios_wireless_controller_global:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      wireless_controller_global:
        ap_log_server: "enable"
        ap_log_server_ip: "<your_own_value>"
        ap_log_server_port: "5"
        control_message_offload: "ebp-frame"
        data_ethernet_II: "enable"
        discovery_mc_addr: "<your_own_value>"
        fiapp_eth_type: "9"
        image_download: "enable"
        ipsec_base_ip: "<your_own_value>"
        link_aggregation: "enable"
        location: "<your_own_value>"
        max_clients: "14"
        max_retransmit: "15"
        mesh_eth_type: "16"
        name: "default_name_17"
        rogue_scan_mac_adjacency: "18"
        wtp_share: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

build

string

always

Build number of the fortigate image


Sample:

1547

http_method

string

always

Last method used to provision the content into FortiGate


Sample:

PUT

http_status

string

always

Last result given by FortiGate on last operation applied


Sample:

200

mkey

string

success

Master key (id) used in the last call to FortiGate


Sample:

id

name

string

always

Name of the table used to fulfill the request


Sample:

urlfilter

path

string

always

Path of the table used to fulfill the request


Sample:

webfilter

revision

string

always

Internal revision number


Sample:

17.0.2.10658

serial

string

always

Serial number of the unit


Sample:

FGVMEVYYQT3AB5352

status

string

always

Indication of the operation's result


Sample:

success

vdom

string

always

Virtual domain used


Sample:

root

version

string

always

Version of the FortiGate


Sample:

v5.6.3




Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/fortios_wireless_controller_global_module.html