iosxr_l2_interfaces – Manage Layer-2 interface on Cisco IOS-XR devices
iosxr_l2_interfaces – Manage Layer-2 interface on Cisco IOS-XR devices
New in version 2.9.
Synopsis
- This module manages the Layer-2 interface attributes on Cisco IOS-XR devices.
Parameters
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
config list / elements=dictionary |
A dictionary of Layer-2 interface options | |||
l2protocol list |
Configures Layer 2 protocol tunneling and protocol data unit (PDU) filtering on an interface. | |||
cdp string |
|
Cisco Discovery Protocol (CDP) tunneling and data unit parameters. | ||
pvst string |
|
Configures the per-VLAN Spanning Tree Protocol (PVST) tunneling and data unit parameters. | ||
stp string |
|
Spanning Tree Protocol (STP) tunneling and data unit parameters. | ||
vtp string |
|
VLAN Trunk Protocol (VTP) tunneling and data unit parameters. | ||
l2transport boolean |
|
Switchport mode access command to configure the interface as a layer 2 access | ||
name string / required |
Full name of the interface/sub-interface excluding any logical unit number, e.g. GigabitEthernet0/0/0/1 or GigabitEthernet0/0/0/1.100. | |||
native_vlan integer |
Configure a native VLAN ID for the trunk | |||
propagate boolean |
|
Propagate Layer 2 transport events. Note that it will work only when the l2tranport option is set to TRUE | ||
q_vlan list |
802.1Q VLAN configuration. Note that it can accept either 2 VLAN IDs when configuring Q-in-Q VLAN, or it will accept 1 VLAN ID and 'any' as input list when configuring Q-in-any vlan as input. Note, that this option is valid only with respect to Sub-Interface and is not valid when configuring for Interface. | |||
state string |
|
The state of the configuration after module completion |
Notes
Note
- Tested against Cisco IOS-XRv Version 6.1.3 on VIRL.
- This module works with connection
network_cli
. See the IOS-XR Platform Options.
Examples
---
# Using merged
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# !
- name: Merge provided configuration with device configuration
iosxr_l2_interfaces:
config:
- name: GigabitEthernet0/0/0/3
native_vlan: 20
- name: GigabitEthernet0/0/0/4
native_vlan: 40
l2transport: True
l2protocol:
- stp: tunnel
- name: GigabitEthernet0/0/0/3.900
l2transport: True
q_vlan:
- 20
- 40
state: merged
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 10
# l2transport
# l2protocol stp tunnel
# !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
# dot1q vlan 20 40
# !
# Using replaced
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 10
# l2transport
# l2protocol stp tunnel
# !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
# dot1q vlan 20 40
# !
- name: Replaces device configuration of listed interfaces with provided configuration
iosxr_l2_interfaces:
config:
- name: GigabitEthernet0/0/0/4
native_vlan: 40
l2transport: True
l2protocol:
- stp: forward
- name: GigabitEthernet0/0/0/3.900
q_vlan:
- 20
- any
state: replaced
# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 40
# l2transport
# l2protocol stp forward
# !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
# dot1q vlan 20 any
# !
# Using overridden
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 10
# l2transport
# l2protocol stp tunnel
# !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
# dot1q vlan 20 40
# !
- name: Override device configuration of all interfaces with provided configuration
iosxr_l2_interfaces:
config:
- name: GigabitEthernet0/0/0/4
native_vlan: 40
l2transport: True
l2protocol:
- stp: forward
- name: GigabitEthernet0/0/0/3.900
q_vlan:
- 20
- any
state: overridden
# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 40
# l2transport
# l2protocol stp forward
# !
# !
# interface GigabitEthernet0/0/0/3.900
# dot1q vlan 20 any
# !
# Using deleted
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 10
# l2transport
# l2protocol stp tunnel
# !
# !
#
- name: "Delete L2 attributes of given interfaces (Note: This won't delete the interface itself)"
iosxr_l2_interfaces:
config:
- name: GigabitEthernet0/0/0/4
state: deleted
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# !
# Using Deleted without any config passed
# "(NOTE: This will delete all of configured resource module attributes from each configured interface)"
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# dot1q native vlan 10
# l2transport
# l2protocol stp tunnel
# !
# !
- name: "Delete L2 attributes of all interfaces (Note: This won't delete the interface itself)"
iosxr_l2_interfaces:
state: deleted
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
# description Ansible Network
# vrf custB
# ipv4 address 10.10.0.2 255.255.255.0
# duplex half
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# description Test description
# !
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after list |
when changed |
The configuration as structured data after module completion.
Sample: The configuration returned will always be in the same format of the parameters above. |
before list |
always |
The configuration as structured data prior to module invocation.
Sample: The configuration returned will always be in the same format of the parameters above. |
commands list |
always |
The set of commands pushed to the remote device
Sample: ['interface GigabitEthernet0/0/0/2', 'command 2', 'command 3'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Sumit Jaiswal (@justjais)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/iosxr_l2_interfaces_module.html