onyx_traffic_class – Configures Traffic Class

New in version 2.9.

Synopsis
Parameters
Examples
Return Values
Status

Synopsis

This module provides declarative management of Traffic Class configuration on Mellanox ONYX network devices.

Parameters

Parameter		Choices/Defaults	Comments
congestion_control -			configure congestion control on interface.
	control - / required	red ecn both	congestion control type.
	max_threshold - / required		Set maximum-threshold value (in KBs) for marking traffic-class queue.
	min_threshold - / required		Set minimum-threshold value (in KBs) for marking traffic-class queue.
	threshold_mode - / required	absolute relative	congestion control threshold mode.
dcb -			configure dcb control on interface.
	mode - / required	strict wrr	dcb control mode.
	weight -		Relevant only for wrr mode.
interfaces - / required			list of interfaces name.
state -		enabled ← disabled	enable congestion control on interface.
tc - / required			traffic class, range 0-7.

Examples

- name: configure traffic class
  onyx_traffic_class:
    interfaces:
      - Eth1/1
      - Eth1/2
    tc: 3
    congestion_control:
      control: ecn
      threshold_mode: absolute
      min_threshold: 500
      max_threshold: 1500
    dcb:
      mode: strict

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	The list of configuration mode commands to send to the device. Sample: ['interface ethernet 1/15 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface ethernet 1/16 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface mlag-port-channel 7 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface port-channel 1 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface ethernet 1/15 traffic-class 3 dcb ets strict', 'interface ethernet 1/16 traffic-class 3 dcb ets strict', 'interface mlag-port-channel 7 traffic-class 3 dcb ets strict', 'interface port-channel 1 traffic-class 3 dcb ets strict']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

Anas Badaha (@anasb)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/onyx_traffic_class_module.html