fortios_user_radius – Configure RADIUS server entries in Fortinet’s FortiOS and FortiGate
fortios_user_radius – Configure RADIUS server entries in Fortinet’s FortiOS and FortiGate
New in version 2.8.
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify user feature and radius category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5
Requirements
The below requirements are needed on the host that executes this module.
- fortiosapi>=0.9.8
Parameters
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
|
host string |
FortiOS or FortiGate IP address. | |||
|
https boolean |
|
Indicates if the requests towards FortiGate must use HTTPS protocol. | ||
|
password string |
Default: "" |
FortiOS or FortiGate password. | ||
|
ssl_verify boolean added in 2.9 |
|
Ensures FortiGate certificate must be verified by a proper CA. | ||
|
state string added in 2.9 |
|
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level. | ||
|
user_radius dictionary |
Default: null |
Configure RADIUS server entries. | ||
|
accounting_server list |
Additional accounting servers. | |||
|
id integer / required |
ID (0 - 4294967295). | |||
|
port integer |
RADIUS accounting port number. | |||
|
secret string |
Secret key. | |||
|
server string |
name_str or ip_str Server CN domain name or IP. | |||
|
source_ip string |
Source IP address for communications to the RADIUS server. | |||
|
status string |
|
Status. | ||
|
acct_all_servers string |
|
Enable/disable sending of accounting messages to all configured servers. | ||
|
acct_interim_interval integer |
Time in seconds between each accounting interim update message. | |||
|
all_usergroup string |
|
Enable/disable automatically including this RADIUS server in all user groups. | ||
|
auth_type string |
|
Authentication methods/protocols permitted for this RADIUS server. | ||
|
class list |
Class attribute name(s). | |||
|
name string / required |
Class name. | |||
|
h3c_compatibility string |
|
Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication. | ||
|
name string / required |
RADIUS server entry name. | |||
|
nas_ip string |
IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes. | |||
|
password_encoding string |
|
Password encoding. | ||
|
password_renewal string |
|
Enable/disable password renewal. | ||
|
radius_coa string |
|
Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated. | ||
|
radius_port integer |
RADIUS service port number. | |||
|
rsso string |
|
Enable/disable RADIUS based single sign on feature. | ||
|
rsso_context_timeout integer |
Time in seconds before the logged out user is removed from the "user context list" of logged on users. | |||
|
rsso_endpoint_attribute string |
|
RADIUS attributes used to extract the user end point identifier from the RADIUS Start record. | ||
|
rsso_endpoint_block_attribute string |
|
RADIUS attributes used to block a user. | ||
|
rsso_ep_one_ip_only string |
|
Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages. | ||
|
rsso_flush_ip_session string |
|
Enable/disable flushing user IP sessions on RADIUS accounting Stop messages. | ||
|
rsso_log_flags string |
|
Events to log. | ||
|
rsso_log_period integer |
Time interval in seconds that group event log messages will be generated for dynamic profile events. | |||
|
rsso_radius_response string |
|
Enable/disable sending RADIUS response packets after receiving Start and Stop records. | ||
|
rsso_radius_server_port integer |
UDP port to listen on for RADIUS Start and Stop records. | |||
|
rsso_secret string |
RADIUS secret used by the RADIUS accounting server. | |||
|
rsso_validate_request_secret string |
|
Enable/disable validating the RADIUS request shared secret in the Start or End record. | ||
|
secondary_secret string |
Secret key to access the secondary server. | |||
|
secondary_server string |
name_str or ip_str secondary RADIUS CN domain name or IP. | |||
|
secret string |
Pre-shared secret key used to access the primary RADIUS server. | |||
|
server string |
Primary RADIUS server CN domain name or IP address. | |||
|
source_ip string |
Source IP address for communications to the RADIUS server. | |||
|
sso_attribute string |
|
RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record. | ||
|
sso_attribute_key string |
Key prefix for SSO group value in the SSO attribute. | |||
|
sso_attribute_value_override string |
|
Enable/disable override old attribute value with new value for the same endpoint. | ||
|
state string |
|
Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object. | ||
|
tertiary_secret string |
Secret key to access the tertiary server. | |||
|
tertiary_server string |
name_str or ip_str tertiary RADIUS CN domain name or IP. | |||
|
timeout integer |
Time in seconds between re-sending authentication requests. | |||
|
use_management_vdom string |
|
Enable/disable using management VDOM to send requests. | ||
|
username_case_sensitive string |
|
Enable/disable case sensitive user names. | ||
|
username string |
FortiOS or FortiGate username. | |||
|
vdom string |
Default: "root" |
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. |
Notes
Note
- Requires fortiosapi library developed by Fortinet
- Run as a local_action in your playbook
Examples
- hosts: localhost
vars:
host: "192.168.122.40"
username: "admin"
password: ""
vdom: "root"
ssl_verify: "False"
tasks:
- name: Configure RADIUS server entries.
fortios_user_radius:
host: "{{ host }}"
username: "{{ username }}"
password: "{{ password }}"
vdom: "{{ vdom }}"
https: "False"
state: "present"
user_radius:
accounting_server:
-
id: "4"
port: "5"
secret: "<your_own_value>"
server: "192.168.100.40"
source_ip: "84.230.14.43"
status: "enable"
acct_all_servers: "enable"
acct_interim_interval: "11"
all_usergroup: "disable"
auth_type: "auto"
class:
-
name: "default_name_15"
h3c_compatibility: "enable"
name: "default_name_17"
nas_ip: "<your_own_value>"
password_encoding: "auto"
password_renewal: "enable"
radius_coa: "enable"
radius_port: "22"
rsso: "enable"
rsso_context_timeout: "24"
rsso_endpoint_attribute: "User-Name"
rsso_endpoint_block_attribute: "User-Name"
rsso_ep_one_ip_only: "enable"
rsso_flush_ip_session: "enable"
rsso_log_flags: "protocol-error"
rsso_log_period: "30"
rsso_radius_response: "enable"
rsso_radius_server_port: "32"
rsso_secret: "<your_own_value>"
rsso_validate_request_secret: "enable"
secondary_secret: "<your_own_value>"
secondary_server: "<your_own_value>"
secret: "<your_own_value>"
server: "192.168.100.40"
source_ip: "84.230.14.43"
sso_attribute: "User-Name"
sso_attribute_key: "<your_own_value>"
sso_attribute_value_override: "enable"
tertiary_secret: "<your_own_value>"
tertiary_server: "<your_own_value>"
timeout: "45"
use_management_vdom: "enable"
username_case_sensitive: "enable"Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
|
build string |
always |
Build number of the fortigate image
Sample: 1547 |
|
http_method string |
always |
Last method used to provision the content into FortiGate
Sample: PUT |
|
http_status string |
always |
Last result given by FortiGate on last operation applied
Sample: 200 |
|
mkey string |
success |
Master key (id) used in the last call to FortiGate
Sample: id |
|
name string |
always |
Name of the table used to fulfill the request
Sample: urlfilter |
|
path string |
always |
Path of the table used to fulfill the request
Sample: webfilter |
|
revision string |
always |
Internal revision number
Sample: 17.0.2.10658 |
|
serial string |
always |
Serial number of the unit
Sample: FGVMEVYYQT3AB5352 |
|
status string |
always |
Indication of the operation's result
Sample: success |
|
vdom string |
always |
Virtual domain used
Sample: root |
|
version string |
always |
Version of the FortiGate
Sample: v5.6.3 |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/fortios_user_radius_module.html
