fortios_firewall_multicast_policy6 – Configure IPv6 multicast NAT policies in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and multicast_policy6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

fortiosapi>=0.9.8

Parameters

Parameter			Choices/Defaults	Comments
firewall_multicast_policy6 dictionary			Default: null	Configure IPv6 multicast NAT policies.
	action string		accept deny	Accept or deny traffic matching the policy.
	dstaddr list			IPv6 destination address name.
		name string / required		Address name. Source firewall.multicast-address6.name.
	dstintf string			IPv6 destination interface name. Source system.interface.name system.zone.name.
	end_port integer			Integer value for ending TCP/UDP/SCTP destination port in range (1 - 65535).
	id integer / required			Policy ID.
	logtraffic string		enable disable	Enable/disable logging traffic accepted by this policy.
	protocol integer			Integer value for the protocol type as defined by IANA (0 - 255).
	srcaddr list			IPv6 source address name.
		name string / required		Address name. Source firewall.address6.name firewall.addrgrp6.name.
	srcintf string			IPv6 source interface name. Source system.interface.name system.zone.name.
	start_port integer			Integer value for starting TCP/UDP/SCTP destination port in range (1 - 65535).
	state string		present absent	Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object.
	status string		enable disable	Enable/disable this policy.
host string				FortiOS or FortiGate IP address.
https boolean			no yes ←	Indicates if the requests towards FortiGate must use HTTPS protocol.
password string			Default: ""	FortiOS or FortiGate password.
ssl_verify boolean added in 2.9			no yes ←	Ensures FortiGate certificate must be verified by a proper CA.
state string added in 2.9			present absent	Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
username string				FortiOS or FortiGate username.
vdom string			Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Requires fortiosapi library developed by Fortinet
Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure IPv6 multicast NAT policies.
    fortios_firewall_multicast_policy6:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      firewall_multicast_policy6:
        action: "accept"
        dstaddr:
         -
            name: "default_name_5 (source firewall.multicast-address6.name)"
        dstintf: "<your_own_value> (source system.interface.name system.zone.name)"
        end_port: "7"
        id:  "8"
        logtraffic: "enable"
        protocol: "10"
        srcaddr:
         -
            name: "default_name_12 (source firewall.address6.name firewall.addrgrp6.name)"
        srcintf: "<your_own_value> (source system.interface.name system.zone.name)"
        start_port: "14"
        status: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/fortios_firewall_multicast_policy6_module.html