ucs_ip_pool – Configures IP address pools on Cisco UCS Manager
ucs_ip_pool – Configures IP address pools on Cisco UCS Manager
New in version 2.5.
Synopsis
- Configures IP address pools and blocks of IP addresses on Cisco UCS Manager.
- Examples can be used with the UCS Platform Emulator https://communities.cisco.com/ucspe.
Requirements
The below requirements are needed on the host that executes this module.
- ucsmsdk
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
default_gw - |
Default: "0.0.0.0" |
The default gateway associated with the IPv4 addresses in the block. |
descrption - |
The user-defined description of the IP address pool. Enter up to 256 characters. You can use any characters or spaces except the following: ` (accent mark), (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote).
| |
first_addr - |
The first IPv4 address in the IPv4 addresses block. This is the From field in the UCS Manager Add IPv4 Blocks menu. | |
hostname string / required |
IP address or hostname of Cisco UCS Manager. | |
ipv6_default_gw - |
Default: "::" |
The default gateway associated with the IPv6 addresses in the block. |
ipv6_first_addr - |
The first IPv6 address in the IPv6 addresses block. This is the From field in the UCS Manager Add IPv6 Blocks menu. | |
ipv6_last_addr - |
The last IPv6 address in the IPv6 addresses block. This is the To field in the UCS Manager Add IPv6 Blocks menu. | |
ipv6_prefix - |
Default: "64" |
The network address prefix associated with the IPv6 addresses in the block. |
ipv6_primary_dns - |
Default: "::" |
The primary DNS server that this block of IPv6 addresses should access. |
ipv6_secondary_dns - |
Default: "::" |
The secondary DNS server that this block of IPv6 addresses should access. |
last_addr - |
The last IPv4 address in the IPv4 addresses block. This is the To field in the UCS Manager Add IPv4 Blocks menu. | |
name - / required |
The name of the IP address pool. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), "_" (underscore), : (colon), and . (period). You cannot change this name after the IP address pool is created. | |
order - |
|
The Assignment Order field. This can be one of the following: default - Cisco UCS Manager selects a random identity from the pool. sequential - Cisco UCS Manager selects the lowest available identity from the pool. |
org_dn - |
Default: "org-root" |
Org dn (distinguished name) |
password string / required |
Password for Cisco UCS Manager authentication. | |
port integer |
Port number to be used during connection (by default uses 443 for https and 80 for http connection). | |
primary_dns - |
Default: "0.0.0.0" |
The primary DNS server that this block of IPv4 addresses should access. |
proxy string |
If use_proxy is no, specfies proxy to be used for connection. e.g. 'http://proxy.xy.z:8080' | |
secondary_dns - |
Default: "0.0.0.0" |
The secondary DNS server that this block of IPv4 addresses should access. |
state - |
|
If If |
subnet_mask - |
Default: "255.255.255.0" |
The subnet mask associated with the IPv4 addresses in the block. |
use_proxy boolean |
|
If |
use_ssl boolean |
|
If |
username string |
Default: "admin" |
Username for Cisco UCS Manager authentication. |
Examples
- name: Configure IPv4 address pools
ucs_ip_pool:
hostname: 172.16.143.150
username: admin
password: password
name: ip-A
order: sequential
first_addr: 192.168.0.10
last_addr: 192.168.0.19
subnet_mask: 255.255.255.0
default_gw: 192.168.0.1
primary_dns: 172.16.143.136
- name: Configure IPv6 address pools
ucs_ip_pool:
hostname: 172.16.143.150
username: admin
password: password
name: ipv6-B
ipv6_first_addr: fe80::1cae:7992:d7a1:ed07
ipv6_last_addr: fe80::1cae:7992:d7a1:edfe
ipv6_default_gw: fe80::1cae:7992:d7a1:ecff
- name: Remove IPv4 address pools
ucs_ip_pool:
hostname: 172.16.143.150
username: admin
password: password
name: ip-A
state: absent
- name: Remove IPv6 address pools
ucs_ip_pool:
hostname: 172.16.143.150
username: admin
password: password
name: ipv6-B
state: absent
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- David Soper (@dsoper2)
- CiscoUcs (@CiscoUcs)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ucs_ip_pool_module.html