ce_link_status – Get interface link status on HUAWEI CloudEngine switches
ce_link_status – Get interface link status on HUAWEI CloudEngine switches
New in version 2.4.
Synopsis
- Get interface link status on HUAWEI CloudEngine switches.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
interface - / required |
For the interface parameter, you can enter |
Notes
Note
- Current physical state shows an interface’s physical status.
- Current link state shows an interface’s link layer protocol status.
- Current IPv4 state shows an interface’s IPv4 protocol status.
- Current IPv6 state shows an interface’s IPv6 protocol status.
- Inbound octets(bytes) shows the number of bytes that an interface received.
- Inbound unicast(pkts) shows the number of unicast packets that an interface received.
- Inbound multicast(pkts) shows the number of multicast packets that an interface received.
- Inbound broadcast(pkts) shows the number of broadcast packets that an interface received.
- Inbound error(pkts) shows the number of error packets that an interface received.
- Inbound drop(pkts) shows the total number of packets that were sent to the interface but dropped by an interface.
- Inbound rate(byte/sec) shows the rate at which an interface receives bytes within an interval.
- Inbound rate(pkts/sec) shows the rate at which an interface receives packets within an interval.
- Outbound octets(bytes) shows the number of the bytes that an interface sent.
- Outbound unicast(pkts) shows the number of unicast packets that an interface sent.
- Outbound multicast(pkts) shows the number of multicast packets that an interface sent.
- Outbound broadcast(pkts) shows the number of broadcast packets that an interface sent.
- Outbound error(pkts) shows the total number of packets that an interface sent but dropped by the remote interface.
- Outbound drop(pkts) shows the number of dropped packets that an interface sent.
- Outbound rate(byte/sec) shows the rate at which an interface sends bytes within an interval.
- Outbound rate(pkts/sec) shows the rate at which an interface sends packets within an interval.
- Speed shows the rate for an Ethernet interface.
- This module requires the netconf system service be enabled on the remote device being managed.
- Recommended connection is
netconf
. - This module also works with
local
connections for legacy playbooks.
Examples
- name: Link status test
hosts: cloudengine
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Get specified interface link status information
ce_link_status:
interface: 40GE1/0/1
provider: "{{ cli }}"
- name: Get specified interface type link status information
ce_link_status:
interface: 40GE
provider: "{{ cli }}"
- name: Get all interfaces link status information
ce_link_status:
interface: all
provider: "{{ cli }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
result dictionary |
always |
Interface link status information
Sample: {'40ge2/0/8': {'Current IPv4 state': 'down', 'Current IPv6 state': 'down', 'Current link state': 'up', 'Current physical state': 'up', 'Inbound broadcast(pkts)': '0', 'Inbound drop(pkts)': '0', 'Inbound error(pkts)': '0', 'Inbound multicast(pkts)': '20151', 'Inbound octets(bytes)': '7314813', 'Inbound rate(byte/sec)': '11', 'Inbound rate(pkts/sec)': '0', 'Inbound unicast(pkts)': '0', 'Outbound broadcast(pkts)': '1', 'Outbound drop(pkts)': '0', 'Outbound error(pkts)': '0', 'Outbound multicast(pkts)': '20152', 'Outbound octets(bytes)': '7235021', 'Outbound rate(byte/sec)': '11', 'Outbound rate(pkts/sec)': '0', 'Outbound unicast(pkts)': '0', 'Speed': '40GE'}} |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Zhijin Zhou (@QijunPan)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ce_link_status_module.html