bigip_snmp_trap – Manipulate SNMP trap information on a BIG-IP
bigip_snmp_trap – Manipulate SNMP trap information on a BIG-IP
New in version 2.4.
Synopsis
- Manipulate SNMP trap information on a BIG-IP.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
community string |
Specifies the community name for the trap destination. | ||
destination string |
Specifies the address for the trap destination. This can be either an IP address or a hostname. | ||
name string / required |
Name of the SNMP configuration endpoint. | ||
network string |
|
Specifies the name of the trap network. This option is not supported in versions of BIG-IP < 12.1.0. If used on versions < 12.1.0, it will simply be ignored. The value | |
partition string added in 2.5 |
Default: "Common" |
Device partition to manage resources on. | |
password string / required |
The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable
| ||
port string |
Specifies the port for the trap destination. | ||
provider dictionary added in 2.5 |
A dict object containing connection details. | ||
password string / required |
The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable
| ||
server string / required |
The BIG-IP host. You may omit this option by setting the environment variable | ||
server_port integer |
Default: 443 |
The BIG-IP server port. You may omit this option by setting the environment variable | |
ssh_keyfile path |
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable | ||
timeout integer |
Default: 10 |
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | |
transport string |
|
Configures the transport connection to use when connecting to the remote device. | |
user string / required |
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable | ||
validate_certs boolean |
|
If You may omit this option by setting the environment variable | |
server string / required |
The BIG-IP host. You may omit this option by setting the environment variable | ||
server_port integer added in 2.2 |
Default: 443 |
The BIG-IP server port. You may omit this option by setting the environment variable | |
snmp_version string |
|
Specifies to which Simple Network Management Protocol (SNMP) version the trap destination applies. | |
state string |
|
When When | |
user string / required |
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable | ||
validate_certs boolean added in 2.0 |
|
If You may omit this option by setting the environment variable |
Notes
Note
- This module only supports version v1 and v2c of SNMP.
- The
network
option is not supported on versions of BIG-IP < 12.1.0 because the platform did not support that option until 12.1.0. If used on versions < 12.1.0, it will simply be ignored. - For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
- Requires BIG-IP software version >= 12.
- The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.
Examples
- name: Create snmp v1 trap
bigip_snmp_trap:
community: general
destination: 1.2.3.4
name: my-trap1
network: management
port: 9000
snmp_version: 1
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Create snmp v2 trap
bigip_snmp_trap:
community: general
destination: 5.6.7.8
name: my-trap2
network: default
port: 7000
snmp_version: 2c
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
community list |
changed and success |
The new
Sample: secret |
destination string |
changed and success |
The new address for the trap destination in either IP or hostname form.
Sample: 1.2.3.4 |
network string |
changed and success |
The new name of the network the SNMP trap is on.
Sample: management |
port string |
changed and success |
The new
Sample: 900 |
snmp_version string |
changed and success |
The new
Sample: 2c |
Status
- This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Tim Rupp (@caphrim007)
- Wojciech Wypior (@wojtek0806)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_snmp_trap_module.html