onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices

From Get docs
Ansible/docs/2.8/modules/onyx mlag ipl module


onyx_mlag_ipl – Manage IPL (inter-peer link) on Mellanox ONYX network devices

Synopsis

  • This module provides declarative management of IPL (inter-peer link) management on Mellanox ONYX network devices.

Parameters

Parameter Choices/Defaults Comments

name

- / required

Name of the interface (port-channel) IPL should be configured on.

peer_address

-

IPL peer IP address.

state

-

  • present

  • absent

IPL state.

vlan_interface

-

Name of the IPL vlan interface.



Notes

Note

  • Tested on ONYX 3.6.4000


Examples

- name: run configure ipl
  onyx_mlag_ipl:
    name: Po1
    vlan_interface: Vlan 322
    state: present
    peer_address: 192.168.7.1

- name: run remove ipl
  onyx_mlag_ipl:
    name: Po1
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list

always

The list of configuration mode commands to send to the device.


Sample:

['interface port-channel 1 ipl 1', 'interface vlan 1024 ipl 1 peer-address 10.10.10.10']




Status

Authors

  • Samer Deeb (@samerd)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/onyx_mlag_ipl_module.html