fortios_vpn_ipsec_phase1 – Configure VPN remote gateway in Fortinet’s FortiOS and FortiGate

From Get docs
Ansible/docs/2.8/modules/fortios vpn ipsec phase1 module


fortios_vpn_ipsec_phase1 – Configure VPN remote gateway in Fortinet’s FortiOS and FortiGate

New in version 2.8.


Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify vpn_ipsec feature and phase1 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments

host

- / required

FortiOS or FortiGate ip address.

https

boolean

  • no
  • yes

Indicates if the requests towards FortiGate must use HTTPS protocol

password

-

Default:

""

FortiOS or FortiGate password.

username

- / required

FortiOS or FortiGate username.

vdom

-

Default:

"root"

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

vpn_ipsec_phase1

-

Default:

null

Configure VPN remote gateway.

acct-verify

-

  • enable
  • disable

Enable/disable verification of RADIUS accounting record.

add-gw-route

-

  • enable
  • disable

Enable/disable automatically add a route to the remote gateway.

add-route

-

  • disable
  • enable

Enable/disable control addition of a route to peer destination selector.

assign-ip

-

  • disable
  • enable

Enable/disable assignment of IP to IPsec interface via configuration method.

assign-ip-from

-

  • range
  • usrgrp
  • dhcp
  • name

Method by which the IP address will be assigned.

authmethod

-

  • psk
  • signature

Authentication method.

authmethod-remote

-

  • psk
  • signature

Authentication method (remote side).

authpasswd

-

XAuth password (max 35 characters).

authusr

-

XAuth user name.

authusrgrp

-

Authentication user group. Source user.group.name.

auto-negotiate

-

  • enable
  • disable

Enable/disable automatic initiation of IKE SA negotiation.

backup-gateway

-

Instruct unity clients about the backup gateway address(es).

address

- / required

Address of backup gateway.

banner

-

Message that unity client should display after connecting.

cert-id-validation

-

  • enable
  • disable

Enable/disable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

certificate

-

Names of up to 4 signed personal certificates.

name

- / required

Certificate name. Source vpn.certificate.local.name.

childless-ike

-

  • enable
  • disable

Enable/disable childless IKEv2 initiation (RFC 6023).

client-auto-negotiate

-

  • disable
  • enable

Enable/disable allowing the VPN client to bring up the tunnel when there is no traffic.

client-keep-alive

-

  • disable
  • enable

Enable/disable allowing the VPN client to keep the tunnel up when there is no traffic.

comments

-

Comment.

dhgrp

-

  • 1
  • 2
  • 5
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 27
  • 28
  • 29
  • 30
  • 31

DH group.

digital-signature-auth

-

  • enable
  • disable

Enable/disable IKEv2 Digital Signature Authentication (RFC 7427).

distance

-

Distance for routes added by IKE (1 - 255).

dns-mode

-

  • manual
  • auto

DNS server mode.

domain

-

Instruct unity clients about the default DNS domain.

dpd

-

  • disable
  • on-idle
  • on-demand

Dead Peer Detection mode.

dpd-retrycount

-

Number of DPD retry attempts.

dpd-retryinterval

-

DPD retry interval.

eap

-

  • enable
  • disable

Enable/disable IKEv2 EAP authentication.

eap-identity

-

  • use-id-payload
  • send-request

IKEv2 EAP peer identity type.

enforce-unique-id

-

  • disable
  • keep-new
  • keep-old

Enable/disable peer ID uniqueness check.

forticlient-enforcement

-

  • enable
  • disable

Enable/disable FortiClient enforcement.

fragmentation

-

  • enable
  • disable

Enable/disable fragment IKE message on re-transmission.

fragmentation-mtu

-

IKE fragmentation MTU (500 - 16000).

group-authentication

-

  • enable
  • disable

Enable/disable IKEv2 IDi group authentication.

group-authentication-secret

-

Password for IKEv2 IDi group authentication. (ASCII string or hexadecimal indicated by a leading 0x.)

ha-sync-esp-seqno

-

  • enable
  • disable

Enable/disable sequence number jump ahead for IPsec HA.

idle-timeout

-

  • enable
  • disable

Enable/disable IPsec tunnel idle timeout.

idle-timeoutinterval

-

IPsec tunnel idle timeout in minutes (5 - 43200).

ike-version

-

  • 1
  • 2

IKE protocol version.

include-local-lan

-

  • disable
  • enable

Enable/disable allow local LAN access on unity clients.

interface

-

Local physical, aggregate, or VLAN outgoing interface. Source system.interface.name.

ipv4-dns-server1

-

IPv4 DNS server 1.

ipv4-dns-server2

-

IPv4 DNS server 2.

ipv4-dns-server3

-

IPv4 DNS server 3.

ipv4-end-ip

-

End of IPv4 range.

ipv4-exclude-range

-

Configuration Method IPv4 exclude ranges.

end-ip

-

End of IPv4 exclusive range.

id

- / required

ID.

start-ip

-

Start of IPv4 exclusive range.

ipv4-name

-

IPv4 address name. Source firewall.address.name firewall.addrgrp.name.

ipv4-netmask

-

IPv4 Netmask.

ipv4-split-exclude

-

IPv4 subnets that should not be sent over the IPsec tunnel. Source firewall.address.name firewall.addrgrp.name.

ipv4-split-include

-

IPv4 split-include subnets. Source firewall.address.name firewall.addrgrp.name.

ipv4-start-ip

-

Start of IPv4 range.

ipv4-wins-server1

-

WINS server 1.

ipv4-wins-server2

-

WINS server 2.

ipv6-dns-server1

-

IPv6 DNS server 1.

ipv6-dns-server2

-

IPv6 DNS server 2.

ipv6-dns-server3

-

IPv6 DNS server 3.

ipv6-end-ip

-

End of IPv6 range.

ipv6-exclude-range

-

Configuration method IPv6 exclude ranges.

end-ip

-

End of IPv6 exclusive range.

id

- / required

ID.

start-ip

-

Start of IPv6 exclusive range.

ipv6-name

-

IPv6 address name. Source firewall.address6.name firewall.addrgrp6.name.

ipv6-prefix

-

IPv6 prefix.

ipv6-split-exclude

-

IPv6 subnets that should not be sent over the IPsec tunnel. Source firewall.address6.name firewall.addrgrp6.name.

ipv6-split-include

-

IPv6 split-include subnets. Source firewall.address6.name firewall.addrgrp6.name.

ipv6-start-ip

-

Start of IPv6 range.

keepalive

-

NAT-T keep alive interval.

keylife

-

Time to wait in seconds before phase 1 encryption key expires.

local-gw

-

Local VPN gateway.

localid

-

Local ID.

localid-type

-

  • auto
  • fqdn
  • user-fqdn
  • keyid
  • address
  • asn1dn

Local ID type.

mesh-selector-type

-

  • disable
  • subnet
  • host

Add selectors containing subsets of the configuration depending on traffic.

mode

-

  • aggressive
  • main

ID protection mode used to establish a secure channel.

mode-cfg

-

  • disable
  • enable

Enable/disable configuration method.

name

- / required

IPsec remote gateway name.

nattraversal

-

  • enable
  • disable
  • forced

Enable/disable NAT traversal.

negotiate-timeout

-

IKE SA negotiation timeout in seconds (1 - 300).

npu-offload

-

  • enable
  • disable

Enable/disable offloading NPU.

peer

-

Accept this peer certificate. Source user.peer.name.

peergrp

-

Accept this peer certificate group. Source user.peergrp.name.

peerid

-

Accept this peer identity.

peertype

-

  • any
  • one
  • dialup
  • peer
  • peergrp

Accept this peer type.

ppk

-

  • disable
  • allow
  • require

Enable/disable IKEv2 Postquantum Preshared Key (PPK).

ppk-identity

-

IKEv2 Postquantum Preshared Key Identity.

ppk-secret

-

IKEv2 Postquantum Preshared Key (ASCII string or hexadecimal encoded with a leading 0x).

priority

-

Priority for routes added by IKE (0 - 4294967295).

proposal

-

  • des-md5
  • des-sha1
  • des-sha256
  • des-sha384
  • des-sha512

Phase1 proposal.

psksecret

-

Pre-shared secret for PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).

psksecret-remote

-

Pre-shared secret for remote side PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).

reauth

-

  • disable
  • enable

Enable/disable re-authentication upon IKE SA lifetime expiration.

rekey

-

  • enable
  • disable

Enable/disable phase1 rekey.

remote-gw

-

Remote VPN gateway.

remotegw-ddns

-

Domain name of remote gateway (eg. name.DDNS.com).

rsa-signature-format

-

  • pkcs1
  • pss

Digital Signature Authentication RSA signature format.

save-password

-

  • disable
  • enable

Enable/disable saving XAuth username and password on VPN clients.

send-cert-chain

-

  • enable
  • disable

Enable/disable sending certificate chain.

signature-hash-alg

-

  • sha1
  • sha2-256
  • sha2-384
  • sha2-512

Digital Signature Authentication hash algorithms.

split-include-service

-

Split-include services. Source firewall.service.group.name firewall.service.custom.name.

state

-

  • present
  • absent

Indicates whether to create or remove the object

suite-b

-

  • disable
  • suite-b-gcm-128
  • suite-b-gcm-256

Use Suite-B.

type

-

  • static
  • dynamic
  • ddns

Remote gateway type.

unity-support

-

  • disable
  • enable

Enable/disable support for Cisco UNITY Configuration Method extensions.

usrgrp

-

User group name for dialup peers. Source user.group.name.

wizard-type

-

  • custom
  • dialup-forticlient
  • dialup-ios
  • dialup-android
  • dialup-windows
  • dialup-cisco
  • static-fortigate
  • dialup-fortigate
  • static-cisco
  • dialup-cisco-fw

GUI VPN Wizard Type.

xauthtype

-

  • disable
  • client
  • pap
  • chap
  • auto

XAuth type.



Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook


Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure VPN remote gateway.
    fortios_vpn_ipsec_phase1:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      vpn_ipsec_phase1:
        state: "present"
        acct-verify: "enable"
        add-gw-route: "enable"
        add-route: "disable"
        assign-ip: "disable"
        assign-ip-from: "range"
        authmethod: "psk"
        authmethod-remote: "psk"
        authpasswd: "<your_own_value>"
        authusr: "<your_own_value>"
        authusrgrp: "<your_own_value> (source user.group.name)"
        auto-negotiate: "enable"
        backup-gateway:
         -
            address: "<your_own_value>"
        banner: "<your_own_value>"
        cert-id-validation: "enable"
        certificate:
         -
            name: "default_name_19 (source vpn.certificate.local.name)"
        childless-ike: "enable"
        client-auto-negotiate: "disable"
        client-keep-alive: "disable"
        comments: "<your_own_value>"
        dhgrp: "1"
        digital-signature-auth: "enable"
        distance: "26"
        dns-mode: "manual"
        domain: "<your_own_value>"
        dpd: "disable"
        dpd-retrycount: "30"
        dpd-retryinterval: "<your_own_value>"
        eap: "enable"
        eap-identity: "use-id-payload"
        enforce-unique-id: "disable"
        forticlient-enforcement: "enable"
        fragmentation: "enable"
        fragmentation-mtu: "37"
        group-authentication: "enable"
        group-authentication-secret: "<your_own_value>"
        ha-sync-esp-seqno: "enable"
        idle-timeout: "enable"
        idle-timeoutinterval: "42"
        ike-version: "1"
        include-local-lan: "disable"
        interface: "<your_own_value> (source system.interface.name)"
        ipv4-dns-server1: "<your_own_value>"
        ipv4-dns-server2: "<your_own_value>"
        ipv4-dns-server3: "<your_own_value>"
        ipv4-end-ip: "<your_own_value>"
        ipv4-exclude-range:
         -
            end-ip: "<your_own_value>"
            id:  "52"
            start-ip: "<your_own_value>"
        ipv4-name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        ipv4-netmask: "<your_own_value>"
        ipv4-split-exclude: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        ipv4-split-include: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        ipv4-start-ip: "<your_own_value>"
        ipv4-wins-server1: "<your_own_value>"
        ipv4-wins-server2: "<your_own_value>"
        ipv6-dns-server1: "<your_own_value>"
        ipv6-dns-server2: "<your_own_value>"
        ipv6-dns-server3: "<your_own_value>"
        ipv6-end-ip: "<your_own_value>"
        ipv6-exclude-range:
         -
            end-ip: "<your_own_value>"
            id:  "67"
            start-ip: "<your_own_value>"
        ipv6-name: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        ipv6-prefix: "70"
        ipv6-split-exclude: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        ipv6-split-include: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        ipv6-start-ip: "<your_own_value>"
        keepalive: "74"
        keylife: "75"
        local-gw: "<your_own_value>"
        localid: "<your_own_value>"
        localid-type: "auto"
        mesh-selector-type: "disable"
        mode: "aggressive"
        mode-cfg: "disable"
        name: "default_name_82"
        nattraversal: "enable"
        negotiate-timeout: "84"
        npu-offload: "enable"
        peer: "<your_own_value> (source user.peer.name)"
        peergrp: "<your_own_value> (source user.peergrp.name)"
        peerid: "<your_own_value>"
        peertype: "any"
        ppk: "disable"
        ppk-identity: "<your_own_value>"
        ppk-secret: "<your_own_value>"
        priority: "93"
        proposal: "des-md5"
        psksecret: "<your_own_value>"
        psksecret-remote: "<your_own_value>"
        reauth: "disable"
        rekey: "enable"
        remote-gw: "<your_own_value>"
        remotegw-ddns: "<your_own_value>"
        rsa-signature-format: "pkcs1"
        save-password: "disable"
        send-cert-chain: "enable"
        signature-hash-alg: "sha1"
        split-include-service: "<your_own_value> (source firewall.service.group.name firewall.service.custom.name)"
        suite-b: "disable"
        type: "static"
        unity-support: "disable"
        usrgrp: "<your_own_value> (source user.group.name)"
        wizard-type: "custom"
        xauthtype: "disable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

build

string

always

Build number of the fortigate image


Sample:

1547

http_method

string

always

Last method used to provision the content into FortiGate


Sample:

PUT

http_status

string

always

Last result given by FortiGate on last operation applied


Sample:

200

mkey

string

success

Master key (id) used in the last call to FortiGate


Sample:

id

name

string

always

Name of the table used to fulfill the request


Sample:

urlfilter

path

string

always

Path of the table used to fulfill the request


Sample:

webfilter

revision

string

always

Internal revision number


Sample:

17.0.2.10658

serial

string

always

Serial number of the unit


Sample:

FGVMEVYYQT3AB5352

status

string

always

Indication of the operation's result


Sample:

success

vdom

string

always

Virtual domain used


Sample:

root

version

string

always

Version of the FortiGate


Sample:

v5.6.3




Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/fortios_vpn_ipsec_phase1_module.html