ce_vxlan_global – Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices
ce_vxlan_global – Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices
New in version 2.4.
Synopsis
- Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
bridge_domain_id - |
Specifies a bridge domain ID. The value is an integer ranging from 1 to 16777215. | |
nvo3_acl_extend - |
|
Enabling or disabling the VXLAN ACL extension function. |
nvo3_ecmp_hash - |
|
Load balancing of VXLAN packets through ECMP in optimized mode. |
nvo3_eth_trunk_hash - |
|
Eth-Trunk from load balancing VXLAN packets in optimized mode. |
nvo3_gw_enhanced - |
|
Configuring the Layer 3 VXLAN Gateway to Work in Non-loopback Mode. |
nvo3_prevent_loops - |
|
Loop prevention of VXLAN traffic in non-enhanced mode. When the device works in non-enhanced mode, inter-card forwarding of VXLAN traffic may result in loops. |
nvo3_service_extend - |
|
Enabling or disabling the VXLAN service extension function. |
state - |
|
Determines whether the config should be present or not on the device. |
tunnel_mode_vxlan - |
|
Set the tunnel mode to VXLAN when configuring the VXLAN feature. |
Notes
Note
- Recommended connection is
network_cli
. - This module also works with
local
connections for legacy playbooks.
Examples
- name: vxlan global module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Create bridge domain and set tunnel mode to VXLAN
ce_vxlan_global:
bridge_domain_id: 100
nvo3_acl_extend: enable
provider: "{{ cli }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
check to see if a change was made on the device
Sample: True |
end_state dictionary |
verbose mode |
k/v pairs of configuration after module execution
Sample: {'bridge_domain_id': {'80': None, '90': None, '100': None}, 'nvo3_acl_extend': 'enable'} |
existing dictionary |
verbose mode |
k/v pairs of existing configuration
Sample: {'bridge_domain': {'80': None, '90': None}, 'nvo3_acl_extend': 'disable'} |
proposed dictionary |
verbose mode |
k/v pairs of parameters passed into module
Sample: {'bridge_domain_id': '100', 'nvo3_acl_extend': 'enable', 'state="present"': None} |
updates list |
always |
commands sent to the device
Sample: ['bridge-domain 100', 'ip tunnel mode vxlan'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- QijunPan (@QijunPan)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ce_vxlan_global_module.html