onyx_l3_interface – Manage L3 interfaces on Mellanox ONYX network devices
onyx_l3_interface – Manage L3 interfaces on Mellanox ONYX network devices
New in version 2.5.
Synopsis
- This module provides declarative management of L3 interfaces on Mellanox ONYX network devices.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
aggregate - |
List of L3 interfaces definitions | |
ipv4 - |
IPv4 of the L3 interface. | |
ipv6 - |
IPv6 of the L3 interface (not supported for now). | |
name - |
Name of the L3 interface. | |
purge boolean |
|
Purge L3 interfaces not defined in the aggregate parameter. |
state - |
|
State of the L3 interface configuration. |
Examples
- name: Set Eth1/1 IPv4 address
onyx_l3_interface:
name: Eth1/1
ipv4: 192.168.0.1/24
- name: Remove Eth1/1 IPv4 address
onyx_l3_interface:
name: Eth1/1
state: absent
- name: Set IP addresses on aggregate
onyx_l3_interface:
aggregate:
- { name: Eth1/1, ipv4: 192.168.2.10/24 }
- { name: Eth1/2, ipv4: 192.168.3.10/24 }
- name: Remove IP addresses on aggregate
onyx_l3_interface:
aggregate:
- { name: Eth1/1, ipv4: 192.168.2.10/24 }
- { name: Eth1/2, ipv4: 192.168.3.10/24 }
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list |
always. |
The list of configuration mode commands to send to the device
Sample: ['interfaces ethernet 1/1 ip address 192.168.0.1 /24'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Samer Deeb (@samerd)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/onyx_l3_interface_module.html