ios_bgp – Configure global BGP protocol settings on Cisco IOS

From Get docs
Ansible/docs/2.8/modules/ios bgp module


ios_bgp – Configure global BGP protocol settings on Cisco IOS

New in version 2.8.


Synopsis

  • This module provides configuration management of global BGP parameters on devices running Cisco IOS

Parameters

Parameter Choices/Defaults Comments

config

-

Specifies the BGP related configuration.

address_family

-

Specifies BGP address family related configurations.

afi

- / required

  • ipv4
  • ipv6

Type of address family to configure.

auto_summary

boolean

  • no
  • yes

Enable/disable automatic network number summarization.

neighbors

-

Specifies BGP neighbor related configurations in Address Family configuration mode.

activate

boolean

  • no
  • yes

Enable the Address Family for this Neighbor.

advertisement_interval

integer

Minimum interval between sending BGP routing updates for this neighbor.

maximum_prefix

integer

Maximum number of prefixes to accept from this peer.

The range is from 1 to 2147483647.

neighbor

- / required

Neighbor router address.

next_hop_self

boolean

  • no
  • yes

Enable/disable the next hop calculation for this neighbor.

next_hop_unchanged

boolean

  • no
  • yes

Propagate next hop unchanged for iBGP paths to this neighbor.

remove_private_as

boolean

  • no
  • yes

Remove the private AS number from outbound updates.

route_reflector_client

boolean

  • no
  • yes

Specify a neighbor as a route reflector client.

route_server_client

boolean

  • no
  • yes

Specify a neighbor as a route server client.

networks

-

Specify Networks to announce via BGP.

For operation replace, this option is mutually exclusive with root level networks option.

masklen

-

Subnet mask length for the Network to announce(e.g, 8, 16, 24, etc.).

prefix

- / required

Network ID to announce via BGP.

route_map

-

Route map to modify the attributes.

redistribute

-

Specifies the redistribute information from another routing protocol.

id

-

Identifier for the routing protocol for configuring redistribute information.

Valid for protocols 'ospf', 'ospfv3' and 'eigrp'.

metric

-

Specifies the metric for redistributed routes.

protocol

- / required

  • ospf
  • ospfv3
  • eigrp
  • isis
  • static
  • connected
  • odr
  • lisp
  • mobile
  • rip

Specifies the protocol for configuring redistribute information.

route_map

-

Specifies the route map reference.

safi

-

  • flowspec
  • unicast

  • multicast
  • labeled-unicast

Specifies the type of cast for the address family.

synchronization

boolean

  • no
  • yes

Enable/disable IGP synchronization.

bgp_as

integer / required

Specifies the BGP Autonomous System (AS) number to configure on the device.

log_neighbor_changes

boolean

  • no
  • yes

Enable/disable logging neighbor up/down and reset reason.

neighbors

-

Specifies BGP neighbor related configurations.

description

-

Neighbor specific description.

ebgp_multihop

integer

Specifies the maximum hop count for EBGP neighbors not on directly connected networks.

The range is from 1 to 255.

enabled

boolean

  • no
  • yes

Administratively shutdown or enable a neighbor.

local_as

integer

The local AS number for the neighbor.

neighbor

- / required

Neighbor router address.

password

-

Password to authenticate the BGP peer connection.

peer_group

-

Name of the peer group that the neighbor is a member of.

remote_as

integer / required

Remote AS of the BGP neighbor to configure.

timers

-

Specifies BGP neighbor timer related configurations.

holdtime

integer / required

Interval (in seconds) after not receiving a keepalive message that IOS declares a peer dead.

The range is from 0 to 65535.

keepalive

integer / required

Frequency (in seconds) with which the device sends keepalive messages to its peer.

The range is from 0 to 65535.

min_neighbor_holdtime

integer

Interval (in seconds) specifying the minimum acceptable hold-time from a BGP neighbor.

The minimum acceptable hold-time must be less than, or equal to, the interval specified in the holdtime argument.

The range is from 0 to 65535.

update_source

-

Source of the routing updates.

networks

-

Specify Networks to announce via BGP.

For operation replace, this option is mutually exclusive with networks option under address_family.

For operation replace, if the device already has an address family activated, this option is not allowed.

masklen

-

Subnet mask length for the Network to announce(e.g, 8, 16, 24, etc.).

prefix

- / required

Network ID to announce via BGP.

route_map

-

Route map to modify the attributes.

router_id

-

Default:

null

Configures the BGP routing process router-id value.

operation

-

  • merge

  • replace
  • override
  • delete

Specifies the operation to be performed on the BGP process configured on the device.

In case of merge, the input configuration will be merged with the existing BGP configuration on the device.

In case of replace, if there is a diff between the existing configuration and the input configuration, the existing configuration will be replaced by the input configuration for every option that has the diff.

In case of override, all the existing BGP configuration will be removed from the device and replaced with the input configuration.

In case of delete the existing BGP configuration will be removed from the device.



Notes

Note

  • Tested against Cisco IOS Version 15.6(3)M2


Examples

- name: configure global bgp as 64496
  ios_bgp:
    config:
      bgp_as: 64496
      router_id: 192.0.2.1
      log_neighbor_changes: True
      neighbors:
        - neighbor: 203.0.113.5
          remote_as: 64511
          timers:
            keepalive: 300
            holdtime: 360
            min_neighbor_holdtime: 360
        - neighbor: 198.51.100.2
          remote_as: 64498
      networks:
        - prefix: 198.51.100.0
          route_map: RMAP_1
        - prefix: 192.0.2.0
          masklen: 23
      address_family:
        - afi: ipv4
          safi: unicast
          redistribute:
            - protocol: ospf
              id: 223
              metric: 10
    operation: merge

- name: Configure BGP neighbors
  ios_bgp:
    config:
      bgp_as: 64496
      neighbors:
        - neighbor: 192.0.2.10
          remote_as: 64496
          password: ansible
          description: IBGP_NBR_1
          ebgp_multihop: 100
          timers:
            keepalive: 300
            holdtime: 360
            min_neighbor_holdtime: 360
        - neighbor: 192.0.2.15
          remote_as: 64496
          description: IBGP_NBR_2
          ebgp_multihop: 150
    operation: merge

- name: Configure root-level networks for BGP
  ios_bgp:
    config:
      bgp_as: 64496
      networks:
        - prefix: 203.0.113.0
          masklen: 27
          route_map: RMAP_1
        - prefix: 203.0.113.32
          masklen: 27
          route_map: RMAP_2
    operation: merge

- name: Configure BGP neighbors under address family mode
  ios_bgp:
    config:
      bgp_as: 64496
      address_family:
        - afi: ipv4
          safi: unicast
          neighbors:
            - neighbor: 203.0.113.10
              activate: yes
              maximum_prefix: 250
              advertisement_interval: 120
            - neighbor: 192.0.2.15
              activate: yes
              route_reflector_client: True
    operation: merge

- name: remove bgp as 64496 from config
  ios_bgp:
    config:
      bgp_as: 64496
    operation: delete

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list

always

The list of configuration mode commands to send to the device


Sample:

['router bgp 64496', 'bgp router-id 192.0.2.1', 'bgp log-neighbor-changes', 'neighbor 203.0.113.5 remote-as 64511', 'neighbor 203.0.113.5 timers 300 360 360', 'neighbor 198.51.100.2 remote-as 64498', 'network 198.51.100.0 route-map RMAP_1', 'network 192.0.2.0 mask 255.255.254.0', 'address-family ipv4', 'redistribute ospf 223 metric 70', 'exit-address-family']




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Nilashish Chakraborty (@nilashishc)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ios_bgp_module.html