fortios_firewall_vip6 – Configure virtual IP for IPv6 in Fortinet’s FortiOS and FortiGate

From Get docs
Ansible/docs/2.8/modules/fortios firewall vip6 module


fortios_firewall_vip6 – Configure virtual IP for IPv6 in Fortinet’s FortiOS and FortiGate

New in version 2.8.


Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to configure firewall feature and vip6 category. Examples includes all options and need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments

firewall_vip6

-

Default:

null

Configure virtual IP for IPv6.

arp-reply

-

  • disable
  • enable

Enable to respond to ARP requests for this virtual IP address. Enabled by default.

color

-

Color of icon on the GUI.

comment

-

Comment.

extip

-

IP address or address range on the external interface that you want to map to an address or address range on the destination network.

extport

-

Incoming port number range that you want to map to a port number range on the destination network.

http-cookie-age

-

Time in minutes that client web browsers should keep a cookie. Default is 60 seconds. 0 = no time limit.

http-cookie-domain

-

Domain that HTTP cookie persistence should apply to.

http-cookie-domain-from-host

-

  • disable
  • enable

Enable/disable use of HTTP cookie domain from host field in HTTP.

http-cookie-generation

-

Generation of HTTP cookie to be accepted. Changing invalidates all existing cookies.

http-cookie-path

-

Limit HTTP cookie persistence to the specified path.

http-cookie-share

-

  • disable
  • same-ip

Control sharing of cookies across virtual servers. same-ip means a cookie from one virtual server can be used by another. Disable stops cookie sharing.

http-ip-header

-

  • enable
  • disable

For HTTP multiplexing, enable to add the original client IP address in the XForwarded-For HTTP header.

http-ip-header-name

-

For HTTP multiplexing, enter a custom HTTPS header name. The original client IP address is added to this header. If empty, X-Forwarded-For is used.

http-multiplex

-

  • enable
  • disable

Enable/disable HTTP multiplexing.

https-cookie-secure

-

  • disable
  • enable

Enable/disable verification that inserted HTTPS cookies are secure.

id

-

Custom defined ID.

ldb-method

-

  • static
  • round-robin
  • weighted
  • least-session
  • least-rtt
  • first-alive
  • http-host

Method used to distribute sessions to real servers.

mappedip

-

Mapped IP address range in the format startIP-endIP.

mappedport

-

Port number range on the destination network to which the external port number range is mapped.

max-embryonic-connections

-

Maximum number of incomplete connections.

monitor

-

Name of the health check monitor to use when polling to determine a virtual server's connectivity status.

name

- / required

Health monitor name. Source firewall.ldb-monitor.name.

name

- / required

Virtual ip6 name.

outlook-web-access

-

  • disable
  • enable

Enable to add the Front-End-Https header for Microsoft Outlook Web Access.

persistence

-

  • none
  • http-cookie
  • ssl-session-id

Configure how to make sure that clients connect to the same server every time they make a request that is part of the same session.

portforward

-

  • disable
  • enable

Enable port forwarding.

protocol

-

  • tcp
  • udp
  • sctp

Protocol to use when forwarding packets.

realservers

-

Select the real servers that this server load balancing VIP will distribute traffic to.

client-ip

-

Only clients in this IP range can connect to this real server.

healthcheck

-

  • disable
  • enable
  • vip

Enable to check the responsiveness of the real server before forwarding traffic.

holddown-interval

-

Time in seconds that the health check monitor continues to monitor an unresponsive server that should be active.

http-host

-

HTTP server domain name in HTTP header.

id

- / required

Real server ID.

ip

-

IPv6 address of the real server.

max-connections

-

Max number of active connections that can directed to the real server. When reached, sessions are sent to other real servers.

monitor

-

Name of the health check monitor to use when polling to determine a virtual server's connectivity status. Source firewall .ldb-monitor.name.

port

-

Port for communicating with the real server. Required if port forwarding is enabled.

status

-

  • active
  • standby
  • disable

Set the status of the real server to active so that it can accept traffic, or on standby or disabled so no traffic is sent.

weight

-

Weight of the real server. If weighted load balancing is enabled, the server with the highest weight gets more connections.

server-type

-

  • http
  • https
  • imaps
  • pop3s
  • smtps
  • ssl
  • tcp
  • udp
  • ip

Protocol to be load balanced by the virtual server (also called the server load balance virtual IP).

src-filter

-

Source IP6 filter (x:x:x:x:x:x:x:x/x). Separate addresses with spaces.

range

- / required

Source-filter range.

ssl-algorithm

-

  • high
  • medium
  • low
  • custom

Permitted encryption algorithms for SSL sessions according to encryption strength.

ssl-certificate

-

The name of the SSL certificate to use for SSL acceleration. Source vpn.certificate.local.name.

ssl-cipher-suites

-

SSL/TLS cipher suites acceptable from a client, ordered by priority.

cipher

-

  • TLS-RSA-WITH-3DES-EDE-CBC-SHA
  • TLS-DHE-RSA-WITH-DES-CBC-SHA
  • TLS-DHE-DSS-WITH-DES-CBC-SHA

Cipher suite name.

priority

- / required

SSL/TLS cipher suites priority.

versions

-

  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2

SSL/TLS versions that the cipher suite can be used with.

ssl-client-fallback

-

  • disable
  • enable

Enable/disable support for preventing Downgrade Attacks on client connections (RFC 7507).

ssl-client-renegotiation

-

  • allow
  • deny
  • secure

Allow, deny, or require secure renegotiation of client sessions to comply with RFC 5746.

ssl-client-session-state-max

-

Maximum number of client to FortiGate SSL session states to keep.

ssl-client-session-state-timeout

-

Number of minutes to keep client to FortiGate SSL session state.

ssl-client-session-state-type

-

  • disable
  • time
  • count
  • both

How to expire SSL sessions for the segment of the SSL connection between the client and the FortiGate.

ssl-dh-bits

-

  • 768
  • 1024
  • 1536
  • 2048
  • 3072
  • 4096

Number of bits to use in the Diffie-Hellman exchange for RSA encryption of SSL sessions.

ssl-hpkp

-

  • disable
  • enable
  • report-only

Enable/disable including HPKP header in response.

ssl-hpkp-age

-

Number of minutes the web browser should keep HPKP.

ssl-hpkp-backup

-

Certificate to generate backup HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name.

ssl-hpkp-include-subdomains

-

  • disable
  • enable

Indicate that HPKP header applies to all subdomains.

ssl-hpkp-primary

-

Certificate to generate primary HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name.

ssl-hpkp-report-uri

-

URL to report HPKP violations to.

ssl-hsts

-

  • disable
  • enable

Enable/disable including HSTS header in response.

ssl-hsts-age

-

Number of seconds the client should honour the HSTS setting.

ssl-hsts-include-subdomains

-

  • disable
  • enable

Indicate that HSTS header applies to all subdomains.

ssl-http-location-conversion

-

  • enable
  • disable

Enable to replace HTTP with HTTPS in the reply's Location HTTP header field.

ssl-http-match-host

-

  • enable
  • disable

Enable/disable HTTP host matching for location conversion.

ssl-max-version

-

  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2

Highest SSL/TLS version acceptable from a client.

ssl-min-version

-

  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2

Lowest SSL/TLS version acceptable from a client.

ssl-mode

-

  • half
  • full

Apply SSL offloading between the client and the FortiGate (half) or from the client to the FortiGate and from the FortiGate to the server (full).

ssl-pfs

-

  • require
  • deny
  • allow

Select the cipher suites that can be used for SSL perfect forward secrecy (PFS). Applies to both client and server sessions.

ssl-send-empty-frags

-

  • enable
  • disable

Enable/disable sending empty fragments to avoid CBC IV attacks (SSL 3.0 & TLS 1.0 only). May need to be disabled for compatibility with older systems.

ssl-server-algorithm

-

  • high
  • medium
  • low
  • custom
  • client

Permitted encryption algorithms for the server side of SSL full mode sessions according to encryption strength.

ssl-server-cipher-suites

-

SSL/TLS cipher suites to offer to a server, ordered by priority.

cipher

-

  • TLS-RSA-WITH-3DES-EDE-CBC-SHA
  • TLS-DHE-RSA-WITH-DES-CBC-SHA
  • TLS-DHE-DSS-WITH-DES-CBC-SHA

Cipher suite name.

priority

- / required

SSL/TLS cipher suites priority.

versions

-

  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2

SSL/TLS versions that the cipher suite can be used with.

ssl-server-max-version

-

  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2
  • client

Highest SSL/TLS version acceptable from a server. Use the client setting by default.

ssl-server-min-version

-

  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2
  • client

Lowest SSL/TLS version acceptable from a server. Use the client setting by default.

ssl-server-session-state-max

-

Maximum number of FortiGate to Server SSL session states to keep.

ssl-server-session-state-timeout

-

Number of minutes to keep FortiGate to Server SSL session state.

ssl-server-session-state-type

-

  • disable
  • time
  • count
  • both

How to expire SSL sessions for the segment of the SSL connection between the server and the FortiGate.

state

-

  • present
  • absent

Indicates whether to create or remove the object

type

-

  • static-nat
  • server-load-balance

Configure a static NAT or server load balance VIP.

uuid

-

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

weblogic-server

-

  • disable
  • enable

Enable to add an HTTP header to indicate SSL offloading for a WebLogic server.

websphere-server

-

  • disable
  • enable

Enable to add an HTTP header to indicate SSL offloading for a WebSphere server.

host

- / required

FortiOS or FortiGate ip address.

https

boolean

  • no

  • yes

Indicates if the requests towards FortiGate must use HTTPS protocol

password

-

Default:

""

FortiOS or FortiGate password.

username

- / required

FortiOS or FortiGate username.

vdom

-

Default:

"root"

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.



Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook


Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure virtual IP for IPv6.
    fortios_firewall_vip6:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      firewall_vip6:
        state: "present"
        arp-reply: "disable"
        color: "4"
        comment: "Comment."
        extip: "<your_own_value>"
        extport: "<your_own_value>"
        http-cookie-age: "8"
        http-cookie-domain: "<your_own_value>"
        http-cookie-domain-from-host: "disable"
        http-cookie-generation: "11"
        http-cookie-path: "<your_own_value>"
        http-cookie-share: "disable"
        http-ip-header: "enable"
        http-ip-header-name: "<your_own_value>"
        http-multiplex: "enable"
        https-cookie-secure: "disable"
        id:  "18"
        ldb-method: "static"
        mappedip: "<your_own_value>"
        mappedport: "<your_own_value>"
        max-embryonic-connections: "22"
        monitor:
         -
            name: "default_name_24 (source firewall.ldb-monitor.name)"
        name: "default_name_25"
        outlook-web-access: "disable"
        persistence: "none"
        portforward: "disable"
        protocol: "tcp"
        realservers:
         -
            client-ip: "<your_own_value>"
            healthcheck: "disable"
            holddown-interval: "33"
            http-host: "myhostname"
            id:  "35"
            ip: "<your_own_value>"
            max-connections: "37"
            monitor: "<your_own_value> (source firewall.ldb-monitor.name)"
            port: "39"
            status: "active"
            weight: "41"
        server-type: "http"
        src-filter:
         -
            range: "<your_own_value>"
        ssl-algorithm: "high"
        ssl-certificate: "<your_own_value> (source vpn.certificate.local.name)"
        ssl-cipher-suites:
         -
            cipher: "TLS-RSA-WITH-3DES-EDE-CBC-SHA"
            priority: "49"
            versions: "ssl-3.0"
        ssl-client-fallback: "disable"
        ssl-client-renegotiation: "allow"
        ssl-client-session-state-max: "53"
        ssl-client-session-state-timeout: "54"
        ssl-client-session-state-type: "disable"
        ssl-dh-bits: "768"
        ssl-hpkp: "disable"
        ssl-hpkp-age: "58"
        ssl-hpkp-backup: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)"
        ssl-hpkp-include-subdomains: "disable"
        ssl-hpkp-primary: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)"
        ssl-hpkp-report-uri: "<your_own_value>"
        ssl-hsts: "disable"
        ssl-hsts-age: "64"
        ssl-hsts-include-subdomains: "disable"
        ssl-http-location-conversion: "enable"
        ssl-http-match-host: "enable"
        ssl-max-version: "ssl-3.0"
        ssl-min-version: "ssl-3.0"
        ssl-mode: "half"
        ssl-pfs: "require"
        ssl-send-empty-frags: "enable"
        ssl-server-algorithm: "high"
        ssl-server-cipher-suites:
         -
            cipher: "TLS-RSA-WITH-3DES-EDE-CBC-SHA"
            priority: "76"
            versions: "ssl-3.0"
        ssl-server-max-version: "ssl-3.0"
        ssl-server-min-version: "ssl-3.0"
        ssl-server-session-state-max: "80"
        ssl-server-session-state-timeout: "81"
        ssl-server-session-state-type: "disable"
        type: "static-nat"
        uuid: "<your_own_value>"
        weblogic-server: "disable"
        websphere-server: "disable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

build

string

always

Build number of the fortigate image


Sample:

1547

http_method

string

always

Last method used to provision the content into FortiGate


Sample:

PUT

http_status

string

always

Last result given by FortiGate on last operation applied


Sample:

200

mkey

string

success

Master key (id) used in the last call to FortiGate


Sample:

key1

name

string

always

Name of the table used to fulfill the request


Sample:

urlfilter

path

string

always

Path of the table used to fulfill the request


Sample:

webfilter

revision

string

always

Internal revision number


Sample:

17.0.2.10658

serial

string

always

Serial number of the unit


Sample:

FGVMEVYYQT3AB5352

status

string

always

Indication of the operation's result


Sample:

success

vdom

string

always

Virtual domain used


Sample:

root

version

string

always

Version of the FortiGate


Sample:

v5.6.3




Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/fortios_firewall_vip6_module.html