ce_interface_ospf – Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches

New in version 2.4.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis

Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
area - / required		Ospf area associated with this ospf process. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer between 1 and 4294967295.
auth_key_id -		Authentication key id when `auth_mode` is 'hmac-sha256', 'md5' or 'hmac-md5. Valid value is an integer is in the range from 1 to 255.
auth_mode -	none null hmac-sha256 md5 hmac-md5 simple	Specifies the authentication type.
auth_text_md5 -		Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported.
auth_text_simple -		Specifies a password for simple authentication. The value is a string of 1 to 8 characters.
cost -		The cost associated with this interface. Valid values are an integer in the range from 1 to 65535.
dead_interval -		Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer in the range from 1 to 235926000.
hello_interval -		Time between sending successive hello packets. Valid values are an integer in the range from 1 to 65535.
interface - / required		Full name of interface, i.e. 40GE1/0/10.
process_id - / required		Specifies a process ID. The value is an integer ranging from 1 to 4294967295.
silent_interface boolean	no ← yes	Setting to true will prevent this interface from receiving HELLO packets. Valid values are 'true' and 'false'.
state -	present ← absent	Determines whether the config should be present or not on the device.

Notes

Note

This module requires the netconf system service be enabled on the remote device being managed.
Recommended connection is netconf.
This module also works with local connections for legacy playbooks.

Examples

- name: eth_trunk module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Enables OSPF and sets the cost on an interface
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      cost: 100
      provider: '{{ cli }}'

  - name: Sets the dead interval of the OSPF neighbor
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      dead_interval: 100
      provider: '{{ cli }}'

  - name: Sets the interval for sending Hello packets on an interface
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      hello_interval: 2
      provider: '{{ cli }}'

  - name: Disables an interface from receiving and sending OSPF packets
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      silent_interface: true
      provider: '{{ cli }}'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	verbose mode	k/v pairs of configuration after module execution Sample: {'process_id': '1', 'area': '0.0.0.100', 'interface': '10GE1/0/30', 'cost': '100', 'dead_interval': '40', 'hello_interval': '10', 'silent_interface': 'false', 'auth_mode': 'none'}
existing dictionary	verbose mode	k/v pairs of existing configuration Sample: {'process_id': '1', 'area': '0.0.0.100'}
proposed dictionary	verbose mode	k/v pairs of parameters passed into module Sample: {'process_id': '1', 'area': '0.0.0.100', 'interface': '10GE1/0/30', 'cost': '100'}
updates list	always	commands sent to the device Sample: ['interface 10GE1/0/30', 'ospf enable 1 area 0.0.0.100', 'ospf cost 100']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

QijunPan (@QijunPan)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ce_interface_ospf_module.html