nxos_pim_interface – Manages PIM interface configuration

From Get docs
Ansible/docs/2.8/modules/nxos pim interface module


nxos_pim_interface – Manages PIM interface configuration

New in version 2.2.


Synopsis

  • Manages PIM interface configuration settings.

Parameters

Parameter Choices/Defaults Comments

border

boolean

  • no

  • yes

Configures interface to be a boundary of a PIM domain.

dr_prio

string

Configures priority for PIM DR election on interface.

hello_auth_key

string

Authentication for hellos on this interface.

hello_interval

integer

Hello interval in milliseconds for this interface.

interface

string / required

Full name of the interface such as Ethernet1/33.

jp_policy_in

string

Policy for join-prune messages (inbound).

jp_policy_out

string

Policy for join-prune messages (outbound).

jp_type_in

string

  • prefix
  • routemap

Type of policy mapped to jp_policy_in.

jp_type_out

string

  • prefix
  • routemap

Type of policy mapped to jp_policy_out.

neighbor_policy

string

Configures a neighbor policy for filtering adjacencies.

neighbor_type

string

  • prefix
  • routemap

Type of policy mapped to neighbor_policy.

provider

dictionary

Deprecated

Starting with Ansible 2.5 we recommend using connection: network_cli.

This option is only required if you are using NX-API.

For more information please see the NXOS Platform Options guide.

A dict object containing connection details.

auth_pass

string

added in 2.5.3

Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.

authorize

boolean

added in 2.5.3

  • no

  • yes

Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.

host

string / required

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Default:

"0 (use common port)"

Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).

ssh_keyfile

string

Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

timeout

integer

added in 2.3

Default:

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).

transport

string / required

  • cli

  • nxapi

Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.

use_proxy

boolean

added in 2.5

  • no
  • yes

If no, the environment variables http_proxy and https_proxy will be ignored.

use_ssl

boolean

  • no

  • yes

Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.

username

string

Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

validate_certs

boolean

  • no
  • yes

If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

sparse

boolean

  • no

  • yes

Enable/disable sparse-mode on the interface.

state

string

  • present

  • default

Manages desired state of the resource.



Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • When state=default, supported params will be reset to a default state. These include dr_prio, hello_auth_key, hello_interval, jp_policy_out, jp_policy_in, jp_type_in, jp_type_out, border, neighbor_policy, neighbor_type.
  • The hello_auth_key param is not idempotent.
  • hello_auth_key only supports clear text passwords.
  • When state=absent, pim interface configuration will be set to defaults and pim-sm will be disabled on the interface.
  • PIM must be enabled on the device to use this module.
  • This module is for Layer 3 interfaces.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.


Examples

- name: Ensure PIM is not running on the interface
  nxos_pim_interface:
    interface: eth1/33
    state: absent

- name: Ensure the interface has pim-sm enabled with the appropriate priority and hello interval
  nxos_pim_interface:
    interface: eth1/33
    dr_prio: 10
    hello_interval: 40
    state: present

- name: Ensure join-prune policies exist
  nxos_pim_interface:
    interface: eth1/33
    jp_policy_in: JPIN
    jp_policy_out: JPOUT
    jp_type_in: routemap
    jp_type_out: routemap

- name: Ensure defaults are in place
  nxos_pim_interface:
    interface: eth1/33
    state: default

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description

commands

list

always

command sent to the device


Sample:

['interface eth1/33', 'ip pim neighbor-policy test', 'ip pim neighbor-policy test']




Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Jason Edelman (@jedelman8)

Hint

If you notice any issues in this documentation you can edit this document to improve it.


© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/nxos_pim_interface_module.html