na_ontap_net_port – NetApp ONTAP network ports
na_ontap_net_port – NetApp ONTAP network ports
New in version 2.6.
Synopsis
- Modify a ONTAP network port.
Requirements
The below requirements are needed on the host that executes this module.
- A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward
- Ansible 2.6
- Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
- Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
- To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
autonegotiate_admin - |
Enables or disables Ethernet auto-negotiation of speed, duplex and flow control. | |
duplex_admin - |
Specifies the user preferred duplex setting of the port. Valid values auto, half, full | |
flowcontrol_admin - |
Specifies the user preferred flow control setting of the port. | |
hostname string / required |
The hostname or IP address of the ONTAP instance. | |
http_port integer |
Override the default port (80 or 443) with this port | |
https boolean |
|
Enable and disable https |
ipspace - |
Specifies the port's associated IPspace name. The 'Cluster' ipspace is reserved for cluster ports. | |
mtu - |
Specifies the maximum transmission unit (MTU) reported by the port. | |
node - / required |
Specifies the name of node. | |
ontapi integer |
The ontap api version to use | |
password string / required |
Password for the specified user.
| |
ports - / required |
Specifies the name of port(s).
| |
speed_admin - |
Specifies the user preferred speed setting of the port. | |
state - |
|
Whether the specified net port should exist or not. |
username string / required |
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
| |
validate_certs boolean |
|
If set to This should only set to |
Notes
Note
- The modules prefixed with na\_ontap are built to support the ONTAP storage platform.
Examples
- name: Modify Net Port
na_ontap_net_port:
state: present
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
hostname: "{{ netapp_hostname }}"
node: "{{ node_name }}"
ports: e0d,e0c
autonegotiate_admin: true
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- NetApp Ansible Team (@carchi8py) <[email protected]>
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/na_ontap_net_port_module.html