bigip_device_connectivity – Manages device IP configuration settings for HA on a BIG-IP
bigip_device_connectivity – Manages device IP configuration settings for HA on a BIG-IP
New in version 2.5.
Synopsis
- Manages device IP configuration settings for HA on a BIG-IP. Each BIG-IP device has synchronization and failover connectivity information (IP addresses) that you define as part of HA pairing or clustering. This module allows you to configure that information.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
cluster_mirroring string added in 2.7 |
|
Specifies whether mirroring occurs within the same cluster or between different clusters on a multi-bladed system. This parameter is only supported on platforms that have multiple blades, such as Viprion hardware. It is not supported on VE. | |
config_sync_ip string |
Local IP address that the system uses for ConfigSync operations. | ||
failover_multicast boolean |
|
When | |
mirror_primary_address string |
Specifies the primary IP address for the system to use to mirror connections. | ||
mirror_secondary_address string |
Specifies the secondary IP address for the system to use to mirror connections. | ||
multicast_address string |
IP address for the system to send multicast messages associated with failover. When | ||
multicast_interface string |
Interface over which the system sends multicast messages associated with failover. When | ||
multicast_port integer |
Port for the system to send multicast messages associated with failover. When | ||
password string / required |
The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable
| ||
provider dictionary added in 2.5 |
A dict object containing connection details. | ||
password string / required |
The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable
| ||
server string / required |
The BIG-IP host. You may omit this option by setting the environment variable | ||
server_port integer |
Default: 443 |
The BIG-IP server port. You may omit this option by setting the environment variable | |
ssh_keyfile path |
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable | ||
timeout integer |
Default: 10 |
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | |
transport string |
|
Configures the transport connection to use when connecting to the remote device. | |
user string / required |
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable | ||
validate_certs boolean |
|
If You may omit this option by setting the environment variable | |
server string / required |
The BIG-IP host. You may omit this option by setting the environment variable | ||
server_port integer added in 2.2 |
Default: 443 |
The BIG-IP server port. You may omit this option by setting the environment variable | |
unicast_failover list |
Desired addresses to use for failover operations. Options | ||
user string / required |
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable | ||
validate_certs boolean added in 2.0 |
|
If You may omit this option by setting the environment variable |
Notes
Note
- This module is primarily used as a component of configuring HA pairs of BIG-IP devices.
- Requires BIG-IP >= 12.0.0
- For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
- Requires BIG-IP software version >= 12.
- The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.
Examples
- name: Configure device connectivity for standard HA pair
bigip_device_connectivity:
config_sync_ip: 10.1.30.1
mirror_primary_address: 10.1.30.1
unicast_failover:
- address: management-ip
- address: 10.1.30.1
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed boolean |
always |
Denotes if the F5 configuration was updated.
|
cluster_mirroring string |
changed |
The current cluster-mirroring setting.
Sample: between-clusters |
config_sync_ip string |
changed |
The new value of the
Sample: 10.1.1.1 |
failover_multicast boolean |
changed |
Whether a failover multicast attribute has been changed or not.
|
mirror_primary_address string |
changed |
The new value of the
Sample: 10.1.1.2 |
mirror_secondary_address string |
changed |
The new value of the
Sample: 10.1.1.3 |
multicast_address string |
changed |
The new value of the
Sample: 224.0.0.245 |
multicast_interface string |
changed |
The new value of the
Sample: eth0 |
multicast_port integer |
changed |
The new value of the
Sample: 1026 |
unicast_failover list |
changed |
The new value of the
Sample: [{'address': '10.1.1.2', 'port': 1026}] |
Status
- This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Tim Rupp (@caphrim007)
- Wojciech Wypior (@wojtek0806)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_device_connectivity_module.html