Improve this DocUnderstanding Components

From Get docs
< Improve this DocGuide to AngularJS DocumentationAngularjs/docs/1.8/guide/component

Improve this DocUnderstanding Components

In AngularJS, a Component is a special kind of directive that uses a simpler configuration which is suitable for a component-based application structure.

This makes it easier to write an app in a way that's similar to using Web Components or using the new Angular's style of application architecture.

Advantages of Components:

  • simpler configuration than plain directives
  • promote sane defaults and best practices
  • optimized for component-based architecture
  • writing component directives will make it easier to upgrade to Angular

When not to use Components:

  • for directives that need to perform actions in compile and pre-link functions, because they aren't available
  • when you need advanced directive definition options like priority, terminal, multi-element
  • when you want a directive that is triggered by an attribute or CSS class, rather than an element

Creating and configuring a Component

Components can be registered using the .component() method of an AngularJS module (returned by angular.module()). The method takes two arguments:

  • The name of the Component (as string).
  • The Component config object. (Note that, unlike the .directive() method, this method does not take a factory function.)

It's also possible to add components via $compileProvider in a module's config phase.

Comparison between Directive definition and Component definition

Directive Component
bindings No Yes (binds to controller)
bindToController Yes (default: false) No (use bindings instead)
compile function Yes No
controller Yes Yes (default function() {})
controllerAs Yes (default: false) Yes (default: $ctrl)
link functions Yes No
multiElement Yes No
priority Yes No
replace Yes (deprecated) No
require Yes Yes
restrict Yes No (restricted to elements only)
scope Yes (default: false) No (scope is always isolate)
template Yes Yes, injectable
templateNamespace Yes No
templateUrl Yes Yes, injectable
terminal Yes No
transclude Yes (default: false) Yes (default: false)

Component-based application architecture

As already mentioned, the component helper makes it easier to structure your application with a component-based architecture. But what makes a component beyond the options that the component helper has?

  • Components only control their own View and Data: Components should never modify any data or DOM that is out of their own scope. Normally, in AngularJS it is possible to modify data anywhere in the application through scope inheritance and watches. This is practical, but can also lead to problems when it is not clear which part of the application is responsible for modifying the data. That is why component directives use an isolate scope, so a whole class of scope manipulation is not possible.

  • Components have a well-defined public API - Inputs and Outputs: However, scope isolation only goes so far, because AngularJS uses two-way binding. So if you pass an object to a component like this - bindings: {item: '='}, and modify one of its properties, the change will be reflected in the parent component. For components however, only the component that owns the data should modify it, to make it easy to reason about what data is changed, and when. For that reason, components should follow a few simple conventions:

    • Inputs should be using < and @ bindings. The < symbol denotes one-way bindings which are available since 1.5. The difference to = is that the bound properties in the component scope are not watched, which means if you assign a new value to the property in the component scope, it will not update the parent scope. Note however, that both parent and component scope reference the same object, so if you are changing object properties or array elements in the component, the parent will still reflect that change. The general rule should therefore be to never change an object or array property in the component scope. @ bindings can be used when the input is a string, especially when the value of the binding doesn't change.

      bindings: {
        hero: '<',
        comment: '@'
    • Outputs are realized with & bindings, which function as callbacks to component events.

      bindings: {
        onDelete: '&',
        onUpdate: '&'
    • Instead of manipulating Input Data, the component calls the correct Output Event with the changed data. For a deletion, that means the component doesn't delete the hero itself, but sends it back to the owner component via the correct event.

      <!-- note that we use kebab-case for bindings in the template as usual -->
      <editable-field on-update="$ctrl.update('location', value)"></editable-field><br>
      <button ng-click="$ctrl.onDelete({hero: $ctrl.hero})">Delete</button>
    • That way, the parent component can decide what to do with the event (e.g. delete an item or update the properties)

      ctrl.deleteHero(hero) {
        $http.delete(...).then(function() {
          var idx = ctrl.list.indexOf(hero);
          if (idx >= 0) {
            ctrl.list.splice(idx, 1);
  • Components have a well-defined lifecycle: Each component can implement "lifecycle hooks". These are methods that will be called at certain points in the life of the component. The following hook methods can be implemented:

    • $onInit() - Called on each controller after all the controllers on an element have been constructed and had their bindings initialized (and before the pre & post linking functions for the directives on this element). This is a good place to put initialization code for your controller.
    • $onChanges(changesObj) - Called whenever one-way bindings are updated. The changesObj is a hash whose keys are the names of the bound properties that have changed, and the values are an object of the form { currentValue, previousValue, isFirstChange() }. Use this hook to trigger updates within a component such as cloning the bound value to prevent accidental mutation of the outer value.
    • $doCheck() - Called on each turn of the digest cycle. Provides an opportunity to detect and act on changes. Any actions that you wish to take in response to the changes that you detect must be invoked from this hook; implementing this has no effect on when $onChanges is called. For example, this hook could be useful if you wish to perform a deep equality check, or to check a Date object, changes to which would not be detected by AngularJS's change detector and thus not trigger $onChanges. This hook is invoked with no arguments; if detecting changes, you must store the previous value(s) for comparison to the current values.
    • $onDestroy() - Called on a controller when its containing scope is destroyed. Use this hook for releasing external resources, watches and event handlers.
    • $postLink() - Called after this controller's element and its children have been linked. Similar to the post-link function this hook can be used to set up DOM event handlers and do direct DOM manipulation. Note that child elements that contain templateUrl directives will not have been compiled and linked since they are waiting for their template to load asynchronously and their own compilation and linking has been suspended until that occurs. This hook can be considered analogous to the ngAfterViewInit and ngAfterContentInit hooks in Angular. Since the compilation process is rather different in AngularJS there is no direct mapping and care should be taken when upgrading.

By implementing these methods, your component can hook into its lifecycle.

  • An application is a tree of components: Ideally, the whole application should be a tree of components that implement clearly defined inputs and outputs, and minimize two-way data binding. That way, it's easier to predict when data changes and what the state of a component is.

Example of a component tree

The following example expands on the simple component example and incorporates the concepts we introduced above:

Instead of an ngController, we now have a heroList component that holds the data of different heroes, and creates a heroDetail for each of them.

The heroDetail component now contains new functionality:

  • a delete button that calls the bound onDelete function of the heroList component
  • an input to change the hero location, in the form of a reusable editableField component. Instead of manipulating the hero object itself, it sends a changeset upwards to the heroDetail, which sends it upwards to the heroList component, which updates the original data.

Components as route templates

Components are also useful as route templates (e.g. when using ngRoute). In a component-based application, every view is a component:

var myMod = angular.module('myMod', ['ngRoute']);
myMod.component('home', {
  template: '<h1>Home</h1><p>Hello, {{ $ }} !</p>',
  controller: function() {
    this.user = {name: 'world'};
myMod.config(function($routeProvider) {
  $routeProvider.when('/', {
    template: '<home></home>'

When using $routeProvider, you can often avoid some boilerplate, by passing the resolved route dependencies directly to the component. Since 1.5, ngRoute automatically assigns the resolves to the route scope property $resolve (you can also configure the property name via resolveAs). When using components, you can take advantage of this and pass resolves directly into your component without creating an extra route controller:

var myMod = angular.module('myMod', ['ngRoute']);
myMod.component('home', {
  template: '<h1>Home</h1><p>Hello, {{ $ }} !</p>',
  bindings: {
    user: '<'
myMod.config(function($routeProvider) {
  $routeProvider.when('/', {
    template: '<home user="$resolve.user"></home>',
    resolve: {
      user: function($http) { return $http.get('...'); }

Intercomponent Communication

Directives can require the controllers of other directives to enable communication between each other. This can be achieved in a component by providing an object mapping for the require property. The object keys specify the property names under which the required controllers (object values) will be bound to the requiring component's controller.

Note that the required controllers will not be available during the instantiation of the controller, but they are guaranteed to be available just before the $onInit method is executed!

Here is a tab pane example built from components:

Unit-testing Component Controllers

The easiest way to unit-test a component controller is by using the $componentController that is included in ngMock. The advantage of this method is that you do not have to create any DOM elements. The following example shows how to do this for the heroDetail component from above.

The examples use the Jasmine testing framework.

Controller Test:

describe('HeroDetailController', function() {
  var $componentController;

  beforeEach(inject(function(_$componentController_) {
    $componentController = _$componentController_;

  it('should call the `onDelete` binding, when deleting the hero', function() {
    var onDeleteSpy = jasmine.createSpy('onDelete');
    var bindings = {hero: {}, onDelete: onDeleteSpy};
    var ctrl = $componentController('heroDetail', null, bindings);

    expect(onDeleteSpy).toHaveBeenCalledWith({hero: ctrl.hero});

  it('should call the `onUpdate` binding, when updating a property', function() {
    var onUpdateSpy = jasmine.createSpy('onUpdate');
    var bindings = {hero: {}, onUpdate: onUpdateSpy};
    var ctrl = $componentController('heroDetail', null, bindings);

    ctrl.update('foo', 'bar');
      hero: ctrl.hero,
      prop: 'foo',
      value: 'bar'


© 2010–2020 Google, Inc.
Licensed under the Creative Commons Attribution License 3.0.